This is the best Udemy Introduction to SOLIDWORKS coupon code discount for 2024.
So if you’re interested in Justin Flett’s “Introduction to SOLIDWORKS” course, which will help you increase your Design skills, get your discount on this Udemy online course up above while it’s still available. (The coupon code will be instantly applied.)
Introduction to SOLIDWORKS review for 2024
In our review of this course, we try to help you answer all of your most important questions about Introduction to SOLIDWORKS as quickly and efficiently as possible, so that you can determine whether this online education training is worth your time and money.
Feel free to jump to whatever question you want answered the most.
Here’s what you’ll learn:
Why use ITS as an abbreviation of the course name?
During our Introduction to SOLIDWORKS course review, you might sometimes see us refer to it as ITS for the following 2 reasons:
- We created the acronym by taking the first letter of every word (which was very ingenious and innovative, we know)
- We’re lazy and ITS is simpler and easier for reviewing purposes
The full course name is 26 characters long, including blanks, while ITS is 3 characters long.
You do the math.
Okay, we’ll do the math. We’re saving 23 characters every time we use ITS.
So, just a heads up that we’ll be using this abbreviation sometimes, so you’re not left scratching your head and wondering what the heck we’re talking about whenever we refer to ITS throughout the remainder of this review.
Is the Introduction to SOLIDWORKS course for you?
To determine whether Justin Flett’s Udemy course is a good fit for you or not, ask yourself the following questions down below.
The more you answer “yes” to each question, the more likely it is that you’ll like this course.
Can you understand what Justin Flett’s course is about in 30 seconds or less?
Hopefully, you can easily grasp in 10 seconds or less what this online course is about simply by taking a look at the title that Justin Flett chose for the course, “Introduction to SOLIDWORKS”, as well as its subtitle: “Learn the fundamentals of SOLIDWORKS engineering and design software including parts, drawings, and assemblies.”.
This combo of title and subtitle should be enough to communicate the purpose of the training if Justin Flett is a good, clear communicator (which, of course, you want in a teacher).
In our opinion, if you still don’t know what ITS is about after looking at these two things, then this is a red flag, and you might be better off not taking this class.
Among other things, it means Justin Flett hasn’t clearly and accurately conveyed what the course is about and might not be the best teacher for you.
For similar reasons, it’s important that you’re able to clearly understand what Introduction to SOLIDWORKS is all about from the first few lines of the course description.
So take just a few seconds to read the opening lines down below and see what you think of them.
Opening lines of Justin Flett’s official description of ITS
In this course we will learn the fundamental tools and concepts for the SOLIDWORKS engineering and design software. SOLIDWORKS is one of the largest computer aided design (CAD) softwares globally used across numerous industries including manufacturing, automotive, aerospace, defense, medical devices, robotics & automation, consumer products, construction, and many more!
This course will run through the core concepts and tools available within SOLIDWORKS to help us design and build any parts, drawings, and assemblies we may require for our specific projects.
We will start by getting comfortable with the user interface and work-space of SOLIDWORKS, move onto creating our first sketch and design our first parts. Once we have learned a number of the core part design tools we will introduce drawing tools to generate technical or engineering drawings required to manufacture our parts. Finally, we will learn assembly tools to help us design and build our assembly projects that contain multiple components.
(Read more about this course on the official course page.)
Does ITS pass the 30 Seconds Test?
You can read a lot more about Introduction to SOLIDWORKS on the official course page on Udemy, but the point is this: are the title, subtitle, and just the first few lines of the description enough to help you understand what the course is about?
If so, Justin Flett has done a good job and can be considered more trustworthy and a good communicator, which are important qualities for any teacher.
And, if not, maybe you’re better off looking at other Design classes that are more clearly defined and more tailored to your specific interests.
Did Introduction to SOLIDWORKS appeal to you in 30 seconds or less?
Now that you’ve done the 30 Second Test with ITS above, what is your gut reaction to this Design course with only the basic information of its title, subtitle, and the first few opening lines of its official course summary?
Did Justin Flett do a good job conveying its subject matter, and did it immediately get your attention and appeal to you?
If so, Justin Flett’s online course is certainly worth considering some more.
But if not, perhaps it’s in your best interest to consider some other Design courses instead, because clear communication and being able to hook and maintain your interest are two very important qualities for your online learning success.
Does Justin Flett sound like a course instructor you’d like to learn from?
You’ve already learned how to use The 30 Second Test to make a quick evaluation of whether the ITS course is worth taking.
We have a similar 15 Second Bio Test where you read only the first few lines of an instructor’s background — in this case, Justin Flett’s background — and then you make a quick, snap judgment as to whether you think the instructor would be ideal for you.
There is no right or wrong answer. It’s just about going with your gut instinct. What might appeal to one potential student might alienate another, and vice versa.
(FYI, all Udemy instructors, including Justin Flett, have a Udemy profile on their course page, so you can easily check for a bio and background on the Udemy website that way. We’re only including the first few lines of the bio down below for The 15 Second Bio Test).
Opening lines from Justin Flett’s Udemy bio
Mechanical engineer experienced across numerous industries. Specializing in advanced engineering design and manufacturing processes, in addition to robotics, automation, and electro-mechanical systems.
(Learn more about this instructor on the official course page.)
What did you think about Justin Flett after reading just the first few lines of the bio above?
After reading just the first few lines about Justin Flett, did it make you more or less interested in taking the ITS course?
And did it make you feel like Justin Flett was more or less credible and qualified to teach Introduction to SOLIDWORKS?
Finally, overall, did you feel like you’d receive the proper training from the instructor of this Design course?
As always, we encourage you to listen to your gut instinct, which is different for every student.
Are the ITS lessons clear, specific, and organized well?
Part of the (good) problem with Udemy’s online courses, such as the Introduction to SOLIDWORKS course, is that the instructors are constantly updating them, including adding and renaming lessons.
So it makes no sense whatsoever for us to list out all the modules and lessons in the ITS course here, because you can just as easily go to the Udemy course page and get all the up to date course structure as of right now.
We do, however, have some tips about reviewing Justin Flett’s course structure, so that you can get a better sense of whether this program is worth your time or not.
In a nutshell, you want to scan the the titles of the different sections and lessons of the course, and verify that they are clearly relevant to the course’s name, Introduction to SOLIDWORKS, as well as the course’s subtitle, Learn the fundamentals of SOLIDWORKS engineering and design software including parts, drawings, and assemblies..
If the section names and lessons are clear, specific, and relevant, then it’s a good sign that ITS is potentially a good, useful course for you, and you can have more confidence in Justin Flett’s teaching abilities and lesson planning.
On the other hand, if the module names are confusing, vague, or irrelevant, then this is a red flag, which might indicate that the program is worth skipping.
Have you taken some free lessons from Justin Flett that you enjoyed?
Have you already learned something from Justin Flett that you valued or enjoyed?
For example, does the Introduction to SOLIDWORKS training have some free lessons that you can try? (Almost all Udemy instructors will give you at least one or two lessons for free to help you make a better, more informed decision before enrolling in their course.)
But if you weren’t able to get any ITS lessons for free, have you perhaps watched a YouTube video by Justin Flett, or perhaps come across this instructor’s thoughts on Quora, Facebook, LinkedIn, Github, Reddit, or some other platform?
Or have you perhaps even taken one of Justin Flett’s free courses or free webinars? (Many online teachers offer these freebies, which is a great way to get to know them and evaluate their teaching methods before buying one of their courses.)
In any case, the more familiar you are with Justin Flett’s teaching methods, and the more you enjoy them, the more likely it is that Introduction to SOLIDWORKS will be a good fit for you.
(P.S.: We strongly encourage you to seek out some free instruction from Justin Flett before purchasing this course, since it’s one of the best ways to determine whether ITS will be helpful for you.)
Are “Introduction to SOLIDWORKS” reviews generally positive?
On the bottom of the ITS page, you can read student reviews of the class.
Prior to December 13, 2024, there were 1,067 students enrolled, 377 reviews / ratings, and it was overall rated 4.4 out of 5.
Obviously, the more highly other students rate ITS the better, but no matter what, keep an open mind when reading the reviews, since you might still like a course a great deal that other students dislike.
After all, everyone’s got their own opinion.
We recommend that you spend only a couple minutes scanning the ITS reviews to get an overall sense of them. You don’t have to read each one!
Is Justin Flett responsive to student questions in the ITS training?
You can see what other students have to say about this in their ITS reviews.
But, our simple all time favorite way of gauging an instructor’s responsiveness is to simply email the instructor and see if or how they respond.
In this case, Udemy has a messaging system for students / anyone who has an account, and you can send Justin Flett a message through this system quite easily, even if you haven’t bought ITS yet.
For example, you could say, “Hi, and I came across ITS while looking at Design courses on Udemy. If I enroll in your training, would you mind if I asked you any questions along the way?”
If you use this approach, the response (or lack of response) from the professor will tell you everything.
Obviously, the quicker the response the better!
Are you comfortable going through the lessons in Introduction to SOLIDWORKS on your own, online?
This is a big one, because Introduction to SOLIDWORKS is an online course as opposed to a course that you physically take in a classroom.
Of course, you will need a good internet connection to have access to the course material and lessons, but beyond that, you also have to be comfortable being self motivated to some degree, being on your own, and not having any physical interaction with any of the other students taking Introduction to SOLIDWORKS.
Yes, you will be able to interact with the students and the teacher, Justin Flett, online, but it’s a different kind of experience than what you’d get if you were interacting with them in person.
This is not a big deal to most people, but it might be something for you to consider if you feel like you do better taking classes in person rather than learning online.
Do the pros / benefits of ITS make it worth your time?
Ideally, if you’ve gone through the evaluation steps above, you have a list of positive things about the Introduction to SOLIDWORKS training that looks something like this:
- The purpose of ITS can be clearly grasped and understood, and its lesson structure is clear, specific, and well organized
- Justin Flett is well qualified to teach this subject matter, has good teaching abilities, and is responsive to student questions
- Other ITS students have great things to say about the program
Other benefits include:
- You get to go through ITS at your own pace
- You join a community of 1,067 other students taking the course
- You get lifetime access to the training
- All updates to the training are free
- You have a 30 day money back guarantee
Even if there are some things that you don’t like about the program, so what?
The question is simply this: do you think that ITS would be worth your time, even if there are some things that could be better about it?
Can you comfortably afford ITS?
Can you comfortably afford the cost of Introduction to SOLIDWORKS?
This is an important question to answer, because even if you think ITS sounds like the greatest online class in the world, it’s still not worth taking if you can’t comfortably afford it!
Before December 13, 2024, the price was $12.99 before any Udemy discount, and you were able to pay with a credit card.
Keep in mind that this is a Udemy online course, and there’s a great chance that you can get a solid discount on ITS with Udemy coupons / promo codes, especially with the strategies we provide for helping you find the best, most popular coupons available.
We’ll cover that in greater detail in the next section, because at the end of the day, its important that you can learn whatever you want to learn without getting into a lot of credit card debt.
How can you maximize your discount on Introduction to SOLIDWORKS?
By far, the easiest way to get the best and biggest discount on this course is to use the Introduction to SOLIDWORKS discount code link at the top of this page.
It will instantly give you the best coupon code we could find for Justin Flett’s online training.
We don’t believe there’s a bigger discount than the one we provided, but if for some reason you’d like to try find one, you can use the methods below to hunt for the best ITS course coupons and promo codes you can find.
FYI, the methods below will help you not just with getting ITS for a better price, but also with any other Justin Flett Udemy course that you’d like to get for cheaper.
How can Google help you get a ITS discount?
To use this method, do a Google search for the ITS training, but in your search query, be sure to add words like coupon code, promo code, deal, sale, discount, and Udemy.
For example, you might do a search for “Udemy Introduction to SOLIDWORKS promo code” or “Introduction to SOLIDWORKS udemy coupon codes” and see what turns up.
Similarly, you can use the same combination of search terms with Justin Flett’s name and see what happens.
For example, you might do a Google search for “Justin Flett Udemy coupons” or “Justin Flett course coupon codes” and see if that helps you.
However, in general, it’s far more powerful to do a search for deals and coupon codes with the actual training’s name, than with the instructor’s name.
So in this case, for example, prioritize searches for “Introduction to SOLIDWORKS coupons” rather than “Justin Flett coupons”.
How can a Udemy sale get you ITS for cheaper?
Every once in while, Udemy will do a sitewide sale where they offer all (or almost all) their courses at a discounted price. For example, one of the best sales is where every course is only $10 or $9.99.
So, if you’re interested in saving as much money as possible, you could wait and see if you can get ITS for this cheaper Udemy sale price one day.
The problem is that these sales only occur sporadically, so you might be waiting for a while. Also, if Justin Flett decides not to participate in the site wide sale, then you won’t get a discount on ITS, even though you could get a great discount on almost any other class at Udemy!
To understand this, think of there as being two different coupon categories for the ITS course. Category one is an official Udemy coupon (which instructors can opt out of), while category two is a coupon offered directly by the instructor.
At the end of the day, it doesn’t matter what kind of a coupon tag you’re dealing with (for example, “officially from Udemy” or “officially from the instructor”), as long as long as as you’re dealing with active coupons that get you a better price.
How can you get a ITS discount from Justin Flett?
If you’re really serious about getting “Introduction to SOLIDWORKS” for the cheapest price possible, then perhaps one of the most powerful things you can do is get a coupon code straight from Justin Flett, instead of waiting for a Udemy sale.
To do this, you can use either the direct approach or an indirect approach to try to get your discount.
With the direct approach, the big idea is to simply get Justin Flett’s contact info in some way or another (whether it’s email, or Twitter, or whatever else).
Then you send a message saying something like “I’m interested in enrolling in Introduction to SOLIDWORKS. Do you happen to currently have an active coupon code for it that I could use?” (And then, hopefully, you’ll get a reply with your discount code.)
On the other hand, with the indirect approach, you join Justin Flett’s mailing list, if you can find it, and then you hope that at some time ITS will be promoted to you at a discount.
By far, the more powerful approach is the direct approach, because it tends to get results faster. But you can experiment with the indirect approach and see if it works for you.
Can you get ITS for free?
Of course, the best possible price for the ITS training is free! As in, you pay no money whatsoever.
And guess what? Sometimes Udemy instructors provide coupon codes that enable students to take their courses for free. So, perhaps it’s possible that Justin Flett has done this.
Basically, if you’re trying to get this program for free, you will want to search for the course’s name along with other words like free coupon, or 100 off coupon.
For example, you might do a google search for “Introduction to SOLIDWORKS free coupon” or “Introduction to SOLIDWORKS 100 off coupon” and see what happens.
But keep this in mind: often, Udemy teachers will offer a free coupon for their course when it first opens to get some publicity and reviews. And then, after a few days, they’ll make the coupon expired.
So even Justin Flett has offered free coupons for ITS in the past, the odds are likely they will all be currently expired. This is a common pattern that we have found.
What about a ITS free download?
It’s important to understand that there’s a difference between getting full access to the ITS training for free legally with a free coupon code vs. finding a way to download ITS illegally.
If you really want to go the download route, you can do a google search for something like “Introduction to SOLIDWORKS download”.
And if that doesn’t get you the results you want, you can add the word “free” to your search.
For example, perhaps you could do a google search for “Introduction to SOLIDWORKS free download”.
However, even if you get some results from these searches, we do not recommend that you take this course of action.
First of all, there are some shady sites out there that could be trying to infect your computer.
Second, Justin Flett created this course and deserves monetary compensation for it.
And third, if you go the free download route, you’ll be missing out on a lot of value, because you won’t be able to ask the instructor questions or interact with the other 1,067 students enrolled in the program.
Can you get a refund on Introduction to SOLIDWORKS if you don’t like it?
Let’s say that you used our tips above, and you were able to buy the ITS training at a fantastic discounted price. So at this point, you’re super excited.
Then, you actually dive into Justin Flett’s course, and you discover that it just isn’t for you for whatever reason.
And now you’re super bummed, because you feel like it wasn’t money well spent.
Well, guess what?
Udemy offers a rock solid 30 day money back guarantee on all their courses, so you can get a refund on ITS no matter what. And this means there is absolutely no risk.
Indeed, even if you left a super negative, critical review on the ITS training, and then asked for your money back, you’d get a refund. For better or worse, there’s nothing Justin Flett could do about it, since it is simply Udemy policy.
To sum it up: yes, you can get a full refund, so at the end of the day, don’t worry about the possibility of purchasing ITS and not liking it, since you can always get your money back.
What is OCP’s overall rating of Introduction to SOLIDWORKS?
During this ITS review, you’ve learned about some of the unusual ways we like to evaluate courses, such as with The 30 Second Test and The 15 Second Bio Test.
So our overall review process is perhaps a little unusual and different from other reviews out there. Keep this in mind when you consider the overall rating / score that we have given this course.
Anyway, after taking a look at the ITS training, the instructor, Justin Flett, and reading what other students have said about this program, we give it an overall rating of 4.6 out of 5.
Ultimately, though, what matters most is what you would rate it based on the same criteria.
What are some potential alternatives to Introduction to SOLIDWORKS?
If you like this course, you might also be interested in:
1. Hands on Sketch 3 Training – Learn Website Design
Learn web design with Sketch 3 by duplicating every detail of some awesome looking web pages.
Taught by UI/UX Design, Business Analyst, Health Nut, & Teacher
2. Soundscaping for health, relationships and success
Unleash the power of sound to improve all your outcomes in life
Taught by Five-time TED speaker and author of “How to be Heard”
3. After Effects CC: Learn Lower Thirds Title & Motion Graphics
Create & Sell Professional Lower Thirds, Titles Animation, Motion Graphics & Master Graphic Design in After Effects CC
Taught by High Quality Training: Motion Graphics, Video Editing
Step-by-Step from Lines to Perspective
Taught by Architect & CG Artist
5. Learning Cinema 4D – Mastering Cinema 4D Made Easy
Master Maxon Cinema 4D. Learn how to create stunning animation effects. A easy to follow course from Infinite Skills
Taught by High Quality Training
TLDR: Just the quick facts about ITS
Okay, if all of this was Too Long Didn’t Read for you, here is the Cliff’s Notes version of what ITS’s online training is all about:
ITS coupon & course info
Course Name: Introduction to SOLIDWORKS
Subtitle: Learn the fundamentals of SOLIDWORKS engineering and design software including parts, drawings, and assemblies.
Instructor: Taught by Justin Flett
Category: Design
Subcategory: 3D & Animation
Provided by: Udemy
Price: $12.99 (before discount)
Free coupon code: Get Udemy coupon code discount at top of page (no charge for coupon, especially since we are compensated for referrals via affiliate marketing)
ITS review info & popularity
Prior to December 13, 2024…
Students: 1,067 students enrolled
Ratings: 377 reviews
Rank: ranked #645 in Udemy Design Courses in Udemy Design Courses
Rankings tip: rankings change all the time, so even if Introduction to SOLIDWORKS is a bestseller or one of the top Udemy courses one year, it doesn’t mean it will be a top Udemy course the next year
ITS final details
Languages: English
Skill level: Beginner
Lectures: 37 lectures lectures lessons
Duration: 2.5 total hours hours of video
What you get: Learn the fundamentals of SOLIDWORKS
Target audience: Anyone who is interested in CAD
Requirements: Students should have a version of SOLIDWORKS software to practice and run through exercises
Access: Lifetime access
Peace of mind: 30 day money back guarantee
Availability: available online, as well as on iOS and Android
Download options: check course to see if you can download lessons