95% off Getting Started with 3D Printing (Coupon & Review)

Attention: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission at no extra cost to you. Thanks!

Getting Started with 3D Printing - Udemy Coupon

Get Discount


This is the best Udemy Getting Started with 3D Printing coupon code discount for 2025.

So if you’re interested in Justin Mitchel’s “Getting Started with 3D Printing” course, which will help you increase your Design skills, get your discount on this Udemy online course up above while it’s still available. (The coupon code will be instantly applied.)

Getting Started with 3D Printing review for 2025

In our review of this course, we try to help you answer all of your most important questions about Getting Started with 3D Printing as quickly and efficiently as possible, so that you can determine whether this online education training is worth your time and money.

Feel free to jump to whatever question you want answered the most.

Here’s what you’ll learn:

Why use GSW3P as an abbreviation of the course name?

During our Getting Started with 3D Printing course review, you might sometimes see us refer to it as GSW3P for the following 2 reasons:

  1. We created the acronym by taking the first letter of every word (which was very ingenious and innovative, we know)
  2. We’re lazy and GSW3P is simpler and easier for reviewing purposes

The full course name is 32 characters long, including blanks, while GSW3P is 5 characters long.

You do the math.

Okay, we’ll do the math. We’re saving 27 characters every time we use GSW3P.

So, just a heads up that we’ll be using this abbreviation sometimes, so you’re not left scratching your head and wondering what the heck we’re talking about whenever we refer to GSW3P throughout the remainder of this review.

Is the Getting Started with 3D Printing course for you?

To determine whether Justin Mitchel’s Udemy course is a good fit for you or not, ask yourself the following questions down below.

The more you answer “yes” to each question, the more likely it is that you’ll like this course.

Can you understand what Justin Mitchel’s course is about in 30 seconds or less?

Hopefully, you can easily grasp in 10 seconds or less what this online course is about simply by taking a look at the title that Justin Mitchel chose for the course, “Getting Started with 3D Printing”, as well as its subtitle: “Learn the basics of 3D Modeling to create real objects using your 3D Printer or a 3D Printing Service.”.

This combo of title and subtitle should be enough to communicate the purpose of the training if Justin Mitchel is a good, clear communicator (which, of course, you want in a teacher).

In our opinion, if you still don’t know what GSW3P is about after looking at these two things, then this is a red flag, and you might be better off not taking this class.

Among other things, it means Justin Mitchel hasn’t clearly and accurately conveyed what the course is about and might not be the best teacher for you.

For similar reasons, it’s important that you’re able to clearly understand what Getting Started with 3D Printing is all about from the first few lines of the course description.

So take just a few seconds to read the opening lines down below and see what you think of them. 

Opening lines of Justin Mitchel’s official description of GSW3P

Imagine if you could press “print” and then everything you’d ever need would be created. I mean EVERYTHING. Well, this isn’t science fiction completely.. it’s almost 100% possible thanks to 3D Printing.

3D Printing, or additive manufacturing, is a way to build real objects using a three dimensional electronic robot/device based off using 3D CAD models (computer aided drafting). The technology is still in early stages but it’s quickly becoming the best way for anyone to make prototypes and cool objects that wouldn’t have been possible ever before.

Learn how to prototype products and even create functional objects for your home, office, or even as unique gifts for friends.

(Read more about this course on the official course page.)

Does GSW3P pass the 30 Seconds Test?

You can read a lot more about Getting Started with 3D Printing on the official course page on Udemy, but the point is this: are the title, subtitle, and just the first few lines of the description enough to help you understand what the course is about?

If so, Justin Mitchel has done a good job and can be considered more trustworthy and a good communicator, which are important qualities for any teacher.

And, if not, maybe you’re better off looking at other Design classes that are more clearly defined and more tailored to your specific interests.

Did Getting Started with 3D Printing appeal to you in 30 seconds or less?

Now that you’ve done the 30 Second Test with GSW3P above, what is your gut reaction to this Design course with only the basic information of its title, subtitle, and the first few opening lines of its official course summary?

Did Justin Mitchel do a good job conveying its subject matter, and did it immediately get your attention and appeal to you?

If so, Justin Mitchel’s online course is certainly worth considering some more.

But if not, perhaps it’s in your best interest to consider some other Design courses instead, because clear communication and being able to hook and maintain your interest are two very important qualities for your online learning success.

Does Justin Mitchel sound like a course instructor you’d like to learn from?

You’ve already learned how to use The 30 Second Test to make a quick evaluation of whether the GSW3P course is worth taking.

We have a similar 15 Second Bio Test where you read only the first few lines of an instructor’s background — in this case, Justin Mitchel’s background — and then you make a quick, snap judgment as to whether you think the instructor would be ideal for you.

There is no right or wrong answer. It’s just about going with your gut instinct. What might appeal to one potential student might alienate another, and vice versa.

(FYI, all Udemy instructors, including Justin Mitchel, have a Udemy profile on their course page, so you can easily check for a bio and background on the Udemy website that way. We’re only including the first few lines of the bio down below for The 15 Second Bio Test).

Opening lines from Justin Mitchel’s Udemy bio

It all started with an idea. I wanted freedom… badly. Freedom from work, freedom from boredom, and, most of all, the freedom to choose. This simple idea grew to define me; it made me become an entrepreneur.

(Learn more about this instructor on the official course page.)

What did you think about Justin Mitchel after reading just the first few lines of the bio above?

After reading just the first few lines about Justin Mitchel, did it make you more or less interested in taking the GSW3P course?

And did it make you feel like Justin Mitchel was more or less credible and qualified to teach Getting Started with 3D Printing?

Finally, overall, did you feel like you’d receive the proper training from the instructor of this Design course?

As always, we encourage you to listen to your gut instinct, which is different for every student.

Are the GSW3P lessons clear, specific, and organized well?

Part of the (good) problem with Udemy’s online courses, such as the Getting Started with 3D Printing course, is that the instructors are constantly updating them, including adding and renaming lessons.

So it makes no sense whatsoever for us to list out all the modules and lessons in the GSW3P course here, because you can just as easily go to the Udemy course page and get all the up to date course structure as of right now.

We do, however, have some tips about reviewing Justin Mitchel’s course structure, so that you can get a better sense of whether this program is worth your time or not.

In a nutshell, you want to scan the the titles of the different sections and lessons of the course, and verify that they are clearly relevant to the course’s name, Getting Started with 3D Printing, as well as the course’s subtitle, Learn the basics of 3D Modeling to create real objects using your 3D Printer or a 3D Printing Service..

If the section names and lessons are clear, specific, and relevant, then it’s a good sign that GSW3P is potentially a good, useful course for you, and you can have more confidence in Justin Mitchel’s teaching abilities and lesson planning.

On the other hand, if the module names are confusing, vague, or irrelevant, then this is a red flag, which might indicate that the program is worth skipping.

Have you taken some free lessons from Justin Mitchel that you enjoyed?

Have you already learned something from Justin Mitchel that you valued or enjoyed?

For example, does the Getting Started with 3D Printing training have some free lessons that you can try? (Almost all Udemy instructors will give you at least one or two lessons for free to help you make a better, more informed decision before enrolling in their course.)

But if you weren’t able to get any GSW3P lessons for free, have you perhaps watched a YouTube video by Justin Mitchel, or perhaps come across this instructor’s thoughts on Quora, Facebook, LinkedIn, Github, Reddit, or some other platform?

Or have you perhaps even taken one of Justin Mitchel’s free courses or free webinars? (Many online teachers offer these freebies, which is a great way to get to know them and evaluate their teaching methods before buying one of their courses.)

In any case, the more familiar you are with Justin Mitchel’s teaching methods, and the more you enjoy them, the more likely it is that Getting Started with 3D Printing will be a good fit for you.

(P.S.: We strongly encourage you to seek out some free instruction from Justin Mitchel before purchasing this course, since it’s one of the best ways to determine whether GSW3P will be helpful for you.)

Are “Getting Started with 3D Printing” reviews generally positive?

On the bottom of the GSW3P page, you can read student reviews of the class.

Prior to August 24, 2025, there were 652 students enrolled, 293 reviews / ratings, and it was overall rated 4.3 out of 5.

Obviously, the more highly other students rate GSW3P the better, but no matter what, keep an open mind when reading the reviews, since you might still like a course a great deal that other students dislike.

After all, everyone’s got their own opinion.

We recommend that you spend only a couple minutes scanning the GSW3P reviews to get an overall sense of them. You don’t have to read each one!

Is Justin Mitchel responsive to student questions in the GSW3P training?

You can see what other students have to say about this in their GSW3P reviews.

But, our simple all time favorite way of gauging an instructor’s responsiveness is to simply email the instructor and see if or how they respond.

In this case, Udemy has a messaging system for students / anyone who has an account, and you can send Justin Mitchel a message through this system quite easily, even if you haven’t bought GSW3P yet.

For example, you could say, “Hi, and I came across GSW3P while looking at Design courses on Udemy. If I enroll in your training, would you mind if I asked you any questions along the way?”

If you use this approach, the response (or lack of response) from the professor will tell you everything.

Obviously, the quicker the response the better!

Are you comfortable going through the lessons in Getting Started with 3D Printing on your own, online?

This is a big one, because Getting Started with 3D Printing is an online course as opposed to a course that you physically take in a classroom.

Of course, you will need a good internet connection to have access to the course material and lessons, but beyond that, you also have to be comfortable being self motivated to some degree, being on your own, and not having any physical interaction with any of the other students taking Getting Started with 3D Printing.

Yes, you will be able to interact with the students and the teacher, Justin Mitchel, online, but it’s a different kind of experience than what you’d get if you were interacting with them in person.

This is not a big deal to most people, but it might be something for you to consider if you feel like you do better taking classes in person rather than learning online.

Do the pros / benefits of GSW3P make it worth your time?

Ideally, if you’ve gone through the evaluation steps above, you have a list of positive things about the Getting Started with 3D Printing training that looks something like this:

  • The purpose of GSW3P can be clearly grasped and understood, and its lesson structure is clear, specific, and well organized
  • Justin Mitchel is well qualified to teach this subject matter, has good teaching abilities, and is responsive to student questions
  • Other GSW3P students have great things to say about the program

Other benefits include:

  • You get to go through GSW3P at your own pace
  • You join a community of 652 other students taking the course
  • You get lifetime access to the training
  • All updates to the training are free
  • You have a 30 day money back guarantee

Even if there are some things that you don’t like about the program, so what?

The question is simply this: do you think that GSW3P would be worth your time, even if there are some things that could be better about it?

Can you comfortably afford GSW3P?

Can you comfortably afford the cost of Getting Started with 3D Printing?

This is an important question to answer, because even if you think GSW3P sounds like the greatest online class in the world, it’s still not worth taking if you can’t comfortably afford it!

Before August 24, 2025, the price was $12.99 before any Udemy discount, and you were able to pay with a credit card.

Keep in mind that this is a Udemy online course, and there’s a great chance that you can get a solid discount on GSW3P with Udemy coupons / promo codes, especially with the strategies we provide for helping you find the best, most popular coupons available.

We’ll cover that in greater detail in the next section, because at the end of the day, its important that you can learn whatever you want to learn without getting into a lot of credit card debt.

How can you maximize your discount on Getting Started with 3D Printing?

By far, the easiest way to get the best and biggest discount on this course is to use the Getting Started with 3D Printing discount code link at the top of this page.

It will instantly give you the best coupon code we could find for Justin Mitchel’s online training.

We don’t believe there’s a bigger discount than the one we provided, but if for some reason you’d like to try find one, you can use the methods below to hunt for the best GSW3P course coupons and promo codes you can find.

FYI, the methods below will help you not just with getting GSW3P for a better price, but also with any other Justin Mitchel Udemy course that you’d like to get for cheaper.

How can Google help you get a GSW3P discount?

To use this method, do a Google search for the GSW3P training, but in your search query, be sure to add words like coupon code, promo code, deal, sale, discount, and Udemy.

For example, you might do a search for “Udemy Getting Started with 3D Printing promo code” or “Getting Started with 3D Printing udemy coupon codes” and see what turns up.

Similarly, you can use the same combination of search terms with Justin Mitchel’s name and see what happens.

For example, you might do a Google search for “Justin Mitchel Udemy coupons” or “Justin Mitchel course coupon codes” and see if that helps you.

However, in general, it’s far more powerful to do a search for deals and coupon codes with the actual training’s name, than with the instructor’s name.

So in this case, for example, prioritize searches for “Getting Started with 3D Printing coupons” rather than “Justin Mitchel coupons”.

How can a Udemy sale get you GSW3P for cheaper?

Every once in while, Udemy will do a sitewide sale where they offer all (or almost all) their courses at a discounted price. For example, one of the best sales is where every course is only $10 or $9.99.

So, if you’re interested in saving as much money as possible, you could wait and see if you can get GSW3P for this cheaper Udemy sale price one day.

The problem is that these sales only occur sporadically, so you might be waiting for a while. Also, if Justin Mitchel decides not to participate in the site wide sale, then you won’t get a discount on GSW3P, even though you could get a great discount on almost any other class at Udemy!

To understand this, think of there as being two different coupon categories for the GSW3P course. Category one is an official Udemy coupon (which instructors can opt out of), while category two is a coupon offered directly by the instructor.

At the end of the day, it doesn’t matter what kind of a coupon tag you’re dealing with (for example, “officially from Udemy” or “officially from the instructor”), as long as long as as you’re dealing with active coupons that get you a better price.

How can you get a GSW3P discount from Justin Mitchel?

If you’re really serious about getting “Getting Started with 3D Printing” for the cheapest price possible, then perhaps one of the most powerful things you can do is get a coupon code straight from Justin Mitchel, instead of waiting for a Udemy sale.

To do this, you can use either the direct approach or an indirect approach to try to get your discount.

With the direct approach, the big idea is to simply get Justin Mitchel’s contact info in some way or another (whether it’s email, or Twitter, or whatever else).

Then you send a message saying something like “I’m interested in enrolling in Getting Started with 3D Printing. Do you happen to currently have an active coupon code for it that I could use?” (And then, hopefully, you’ll get a reply with your discount code.)

On the other hand, with the indirect approach, you join Justin Mitchel’s mailing list, if you can find it, and then you hope that at some time GSW3P will be promoted to you at a discount.

By far, the more powerful approach is the direct approach, because it tends to get results faster. But you can experiment with the indirect approach and see if it works for you.

Can you get GSW3P for free?

Of course, the best possible price for the GSW3P training is free! As in, you pay no money whatsoever.

And guess what? Sometimes Udemy instructors provide coupon codes that enable students to take their courses for free. So, perhaps it’s possible that Justin Mitchel has done this.

Basically, if you’re trying to get this program for free, you will want to search for the course’s name along with other words like free coupon, or 100 off coupon.

For example, you might do a google search for “Getting Started with 3D Printing free coupon” or “Getting Started with 3D Printing 100 off coupon” and see what happens.

But keep this in mind: often, Udemy teachers will offer a free coupon for their course when it first opens to get some publicity and reviews. And then, after a few days, they’ll make the coupon expired.

So even Justin Mitchel has offered free coupons for GSW3P in the past, the odds are likely they will all be currently expired. This is a common pattern that we have found.

What about a GSW3P free download?

It’s important to understand that there’s a difference between getting full access to the GSW3P training for free legally with a free coupon code vs. finding a way to download GSW3P illegally.

If you really want to go the download route, you can do a google search for something like “Getting Started with 3D Printing download”.

And if that doesn’t get you the results you want, you can add the word “free” to your search.

For example, perhaps you could do a google search for “Getting Started with 3D Printing free download”.

However, even if you get some results from these searches, we do not recommend that you take this course of action.

First of all, there are some shady sites out there that could be trying to infect your computer.

Second, Justin Mitchel created this course and deserves monetary compensation for it.

And third, if you go the free download route, you’ll be missing out on a lot of value, because you won’t be able to ask the instructor questions or interact with the other 652 students enrolled in the program.

Can you get a refund on Getting Started with 3D Printing if you don’t like it?

Let’s say that you used our tips above, and you were able to buy the GSW3P training at a fantastic discounted price. So at this point, you’re super excited.

Then, you actually dive into Justin Mitchel’s course, and you discover that it just isn’t for you for whatever reason.

And now you’re super bummed, because you feel like it wasn’t money well spent.

Well, guess what?

Udemy offers a rock solid 30 day money back guarantee on all their courses, so you can get a refund on GSW3P no matter what. And this means there is absolutely no risk.

Indeed, even if you left a super negative, critical review on the GSW3P training, and then asked for your money back, you’d get a refund. For better or worse, there’s nothing Justin Mitchel could do about it, since it is simply Udemy policy.

To sum it up: yes, you can get a full refund, so at the end of the day, don’t worry about the possibility of purchasing GSW3P and not liking it, since you can always get your money back.

What is OCP’s overall rating of Getting Started with 3D Printing?

During this GSW3P review, you’ve learned about some of the unusual ways we like to evaluate courses, such as with The 30 Second Test and The 15 Second Bio Test.

So our overall review process is perhaps a little unusual and different from other reviews out there. Keep this in mind when you consider the overall rating / score that we have given this course.

Anyway, after taking a look at the GSW3P training, the instructor, Justin Mitchel, and reading what other students have said about this program, we give it an overall rating of 4.5 out of 5.

Ultimately, though, what matters most is what you would rate it based on the same criteria.

What are some potential alternatives to Getting Started with 3D Printing?

If you like this course, you might also be interested in:


1. Drupal Panels: Introduction to Creating Custom Layouts

Drupal Panels Module: Break Free from Drupal Blocks and Regions. Switch to Custom Page Layouts.

Taught by IsáBel Harrison, Developer. Trainer. Helping You Become More Productive.


2. WordPress Website Challenge: Easy Ways to Boost Impact

Learn how to optimize your website’s performance, reach, security, and layout to increase clicks, engagement, and sales.

Taught by Kristen Palana, Professor, Award-Winning Artist, & Digital Do-Gooder


3. Master After Effects CC 2015 Motion Graphics – Foundation

Learn Text Animation and Motion Graphic in After Effects. A Complete After Effects Foundation Skills

Taught by Louay Zambarakji, After Effects and Motion Graphics Expert


4. Adobe Photoshop CC 2015: From Zero to Mastery

Learn the Complete training of Adobe Photoshop CC latest edition 2015 to become a professional creative designer.

Taught by Infinite Education, Teacher at Infinite Education


5. Better UX for Online Businesses & Websites

Learn the tools and techniques to deliver useful and amazing user experience to website visitors

Taught by Chameleon UX Design, UX Design Specialist

TLDR: Just the quick facts about GSW3P

Okay, if all of this was Too Long Didn’t Read for you, here is the Cliff’s Notes version of what GSW3P’s online training is all about:

GSW3P coupon & course info

Course Name: Getting Started with 3D Printing

Subtitle: Learn the basics of 3D Modeling to create real objects using your 3D Printer or a 3D Printing Service.

Instructor: Taught by Justin Mitchel

Category: Design

Subcategory: 3D & Animation

Provided by: Udemy

Price: $12.99 (before discount)

Free coupon code: Get Udemy coupon code discount at top of page (no charge for coupon, especially since we are compensated for referrals via affiliate marketing)

GSW3P review info & popularity

Prior to August 24, 2025…

Students: 652 students enrolled

Ratings: 293 reviews

Rank: ranked #160 in Udemy Design Courses in Udemy Design Courses

Rankings tip: rankings change all the time, so even if Getting Started with 3D Printing is a bestseller or one of the top Udemy courses one year, it doesn’t mean it will be a top Udemy course the next year

GSW3P final details

Languages: English

Skill level: All Levels

Lectures: 9 lectures lectures lessons

Duration: 44 total mins hours of video

What you get: Learn basics of Creating 3D Models to build real world objects

Target audience: Anyone Interested in 3D Printing

Requirements: A computer made after 2007

Access: Lifetime access

Peace of mind: 30 day money back guarantee

Availability: available online, as well as on iOS and Android

Download options: check course to see if you can download lessons

95% off Dive Into Adobe After Effects 4: Advanced Shape Layers (Coupon)

Attention: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission at no extra cost to you. Thanks!

Dive Into Adobe After Effects 4: Advanced Shape Layers - Udemy Coupon

Get Discount


Bonus: download a free guide that reveals 11 tricks for getting the biggest discounts on Udemy courses, including this course.

Coupon & course info

Course Name: Dive Into Adobe After Effects 4: Advanced Shape Layers

Subtitle: Animate shape layers to create hip, professional, and powerful motion graphics in After Effects. Start learning today!

Instructor: Taught by Phil Ebiner, Best Selling Instructor, 125,000+ Students, Video Creator

Category: Design

Subcategory: 3D & Animation

Provided by: Udemy

Price: $25 (before discount)

Free coupon code: See above (no charge for coupon)

Review info & popularity

As of March 23, 2016…

Students: 3,30044 students enrolled

Ratings: 17 reviews

Rank: ranked #278 in Udemy Design Courses

Brief course description

You don’t have to be an After Effects genius to be able to make amazing motion graphics. These video tutorials are at the perfect pace for even beginners. I highly recommend taking After Effects: Motion Graphics for Beginners before taking this course. But for those of you with After Effects experience, jump right in!

The course starts with video tutorials on shape theory and techniques. We go over the basic process of creating shape motion graphics. Then we go dive deeper by using these shape layer animations to create professional motion graphic projects. I’m with you every step of the way, and am always available for questions.

BONUS: Follow along with a downloadable project files.

(Read more about this course on the official course page.)

Phil Ebiner bio

My passion is inspiring people through online courses. I’ve been creating things (videos, photos, businesses, projects) since I was a young child. I’ve created (produced, shot, edited) thousands of videos over the past five years. Now it is time to teach you!

(Learn more about this instructor on the official course page.)

Recommended courses

If you like this course, you might also be interested in:


1. UI Design and Photoshop from Scratch

Learn all you need to know about Photoshop for UI Design from beginning and start your career as UI Designer

Taught by Muhammad Ahsan Idrisi, UI/UX Interaction Design Expert


2. How to Draw Cute Cartoon Characters

Learn how to draw cute ‘kawaii’ styled cartoon characters, quickly and easily! No special talent required. Loads of fun!

Taught by Ben Colefax, Artist


3. Learn to Design a Logo in Adobe Illustrator

Learn how to turn “nice” logos into ones that capture the hearts and imaginations of clients and their customers.

Taught by Ray Ledzus, Graphich Designer


4. Adobe Flash Professional CS6 Training

A Complete Guide for Beginners to Professionals

Taught by Debbie Keller, Adobe Certified Associate


5. Android Design: Master UI/UX Techniques and Material Design

Start Designing Mobile Apps from Scratch by Using UI and UX Techniques and Android Material Design Guidelines

Taught by Deimantas Brandišauskas, UX/UI Designer and Front-End Developer

Final details for this Udemy course

Languages: English

Skill level: Intermediate Level

Lectures: 18 lessons

Duration: 3.5 Hours of video

What you get: Become After Effects Master!

Target audience: After Effects users

Requirements: Any version of After Effects (free trial is fine!)

Access: Lifetime access

Peace of mind: 30 day money back guarantee

Availability: available online, as well as on iOS and Android

Download options: check course to see if you can download lessons

95% off Create Your 2D Animated Series – The Ultimate Course (Coupon)

Attention: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission at no extra cost to you. Thanks!

Create Your 2D Animated Series - The Ultimate Course - Udemy Coupon

Get Discount


Bonus: download a free guide that reveals 11 tricks for getting the biggest discounts on Udemy courses, including this course.

Coupon & course info

Course Name: Create Your 2D Animated Series – The Ultimate Course

Subtitle: Break into the world of 2D animation – learn how to create your own animated series step-by-step with this full guide!

Instructor: Taught by TheRabbitmachine Studio, Animation Studio

Category: Design

Subcategory: 3D & Animation

Provided by: Udemy

Price: $197 (before discount)

Free coupon code: See above (no charge for coupon)

Review info & popularity

As of March 23, 2016…

Students: 1,223 students enrolled

Ratings: 5 reviews

Rank: ranked #427 in Udemy Design Courses

Brief course description

More than 1000 students enrolled within one week!

Updated On: Jan, 6 2016

(Read more about this course on the official course page.)

TheRabbitmachine Studio bio

TheRabbitmachine is an animation studio producing 2D animated shows for TV and web.

(Learn more about this instructor on the official course page.)

Recommended courses

If you like this course, you might also be interested in:


1. Web design : Make your photos look great in web design

Photoshop and Illustrator combined to make any photo look great in web design or a family album

Taught by Adobe Expert Dawid Tuminski, Graphic Designer and Web Developer


2. Create Your Own Styles, Transitions and Templates in PSP7

Creating your own stuff

Taught by Jennifer Clark, ProShow Guru and Graphic Designer


3. Business Website for Beginners and Solopreneurs

Business website in two hours including domain, hosting, email, mailing list, eCommerce, analytics and blog.

Taught by Sam Atkinson, Web, iOS and Java developer extraordinaire


4. Pattern Cutting & Making for Absolute Beginners – Fashion

The ultimate video series for learning basic pattern cutting/making. WE DON’T COVER BLOCK CREATION

Taught by Caroline Hart, Pattern Cutter & Maker – Luxury Fashion Design


5. Freelancer Lifestyle

Start Your Career In the Freelance World

Taught by Matt Schmidt, Online Educator | Career Development Specialist

Final details for this Udemy course

Languages: English

Skill level: Beginner Level

Lectures: 43 lessons

Duration: 1.5 Hours of video

What you get: Understand the full step-by-step process of creating an animated show

Target audience: Beginners to the world of 2D animation who want to get familiar with the whole process of creating an animated show from a concept to a finished episode

Requirements: A computer running MacOS/Windows/Linux and an internet connection.

Access: Lifetime access

Peace of mind: 30 day money back guarantee

Availability: available online, as well as on iOS and Android

Download options: check course to see if you can download lessons

95% off Make a low poly Autumn Scene in Blender and Unity in 30 min! (Coupon)

Attention: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission at no extra cost to you. Thanks!

Make a low poly Autumn Scene in Blender and Unity in 30 min! - Udemy Coupon

Get Discount


Bonus: download a free guide that reveals 11 tricks for getting the biggest discounts on Udemy courses, including this course.

Coupon & course info

Course Name: Make a low poly Autumn Scene in Blender and Unity in 30 min!

Subtitle: Build models in Blender and import them to Unity. Learn how to make easy low poly models.

Instructor: Taught by John Bura, Best Selling Instructor Web/App/Game Developer 250k Students

Category: Design

Subcategory: 3D & Animation

Provided by: Udemy

Price: $20 (before discount)

Free coupon code: See above (no charge for coupon)

Review info & popularity

As of July 14, 2016…

Students: 1279 students enrolled

Ratings: 61 reviews

Rank: ranked #125a in Udemy Design Courses

Brief course description

Learn how to make simple low poly art in Blender and then import it to Unity3D.

One of the best features is that you can watch the courses at any speed you want. This means you can speed up the or slow down the video if you want to.

This course is project based so you will not be learning a bunch of useless coding practices. At the end of this course you will have real world apps to use in your portfolio. We feel that project based training content is the best way to get from A to B. Taking this course means that you learn practical, employableskills immediately.

(Read more about this course on the official course page.)

John Bura bio

John Bura is has been a successful Udemy instructor since 2011. John Bura has been programming games since 1997 and teaching since 2002. John is the owner of the game development studio Mammoth Interactive. This company produces XBOX 360, iPhone, iPad, android, HTML 5, ad-games and more. Mammoth Interactive recently sold a game to Nickelodeon! John has been contracted by many different companies to provide game design, audio, programming, level design and project management. To this day John has 40 commercial games that he has contributed to. Several of the games he has produced have risen to the top 10 in the Apple’s app store. In his spare time John likes to play ultimate Frisbee, cycle and work out.

(Learn more about this instructor on the official course page.)

Recommended courses

If you like this course, you might also be interested in:


1. Visual Design for the Web

Learn how to create responsive and beautifully-designed web pages.

Taught by Kerii Augenstein, Visual Designer/Graphic designer


2. Flat Icons: Create Flat Design Icons In PowerPoint

Learn how to design flat icons in 10 minutes using Microsoft PowerPoint!

Taught by Smartpreneur Academy ✪, Helping People Build Smart Online Businesses


3. How To Design Flat Business Cards In PowerPoint

Learn how to design flat-style business cards in 10 minutes using free icons, fonts and shapes in PowerPoint.

Taught by Smartpreneur Academy ✪, Helping People Build Smart Online Businesses


4. Photoshop CC: Photoshop Actions Course – With 100 Actions!

Learn How to Create Amazing Actions in Photoshop and get 100 Photoshop Actions with this course!

Taught by Marcin Mikus, Retoucher


5. Design Thinking Guide for Successful Professionals

Success Formula for Entrepreneurs, Business Owners and Managers

Taught by S. G. Dutta, Top 1% Performance Coach, MBA and Professional Speaker

Final details for this Udemy course

Languages: English

Skill level: Beginner Level

Lectures: 8 lessons

Duration: 40 mins of video

What you get: Build simple models

Target audience: Complete beginners

Requirements: Blender (Free)

Access: Lifetime access

Peace of mind: 30 day money back guarantee

Availability: available online, as well as on iOS and Android

Download options: check course to see if you can download lessons

95% off Animation in Photoshop: Writing in Motion (Coupon)

Attention: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission at no extra cost to you. Thanks!

Animation in Photoshop: Writing in Motion - Udemy Coupon

Get Discount


Bonus: download a free guide that reveals 11 tricks for getting the biggest discounts on Udemy courses, including this course.

Coupon & course info

Course Name: Animation in Photoshop: Writing in Motion

Subtitle: Create a wonderful writing animation that can be used in logo designs, promo videos or any animation projects.

Instructor: Taught by Azeez Abri, Best seller instructor in graphic design & animation

Category: Design

Subcategory: 3D & Animation

Provided by: Udemy

Price: $20 (before discount)

Free coupon code: See above (no charge for coupon)

Review info & popularity

As of August 12, 2016…

Students: 2095 students enrolled

Ratings: 9 reviews

Rank: ranked #116c in Udemy Design Courses

Brief course description

Have you ever wanted to add some motion to your designs? This class is for anyone who wants to learn how to do an animation, but never had the opportunity! I’ll show you step by step my process of how to break down hand lettering for animating in Adobe Photoshop, and learn the fundamentals of motion design. You’ll be able to follow along even if you’ve never worked with animation in Photoshop.

in this class you will learn how to animate a text in a hand-lettering animation style using only Adobe Photoshop. The class will teach you step by step how to write your name using the right font then animate it using layer mask position animation.

By the end of the course, you’ll have a completely original animation that you can share with the world. I’ll see you in class!

(Read more about this course on the official course page.)

Azeez Abri bio

I am in love with creativity and seeing students succeed and become a professional designers

(Learn more about this instructor on the official course page.)

Recommended courses

If you like this course, you might also be interested in:


1. Easy WordPress Theme Development with Bootstrap

Basic Coding/Install Server/WP: Drop Down Menu/Customizer/Custom Fields/Enqueue Scripts/Themes from scratch/Migrate Site

Taught by Chris Scott, iNet+ | Master CIW Designer


2. Canva Basics: How to Design Album Cover Artwork

Learn everything you need to produce high quality artwork for your music and stand out from the crowd!

Taught by Joseph Evans Jr, Music Producer, Composer, Songwriter


3. Adobe Premiere Pro CC: Learn Video Editing In Premiere Pro

Adobe Premiere Pro video editing for beginners: Edit footage and audio, make titles and more using Adobe Premiere Pro CC

Taught by OVC Masters, Online Video Course Masters helping people learn online


4. Animation in Photoshop: Create an Amazing Motion Typography

Learn how to use Adobe Photoshop to create text based animations for music videos, film credits, advertisements and more

Taught by Azeez Abri, Best seller instructor in graphic design & animation


5. Photoshop CC: Professional Hair Retouching in Photoshop

Learn Amazing Techniques How to Retouch Hair in Photoshop – from Start to Finish!

Taught by Marcin Mikus, Retoucher

Final details for this Udemy course

Languages: English

Skill level: All Levels

Lectures: 10 lessons

Duration: 1 hour of video

What you get: Have a better understanding about animation in Adobe Photoshop

Target audience: anyone who wants to learn animation, but never had the opportunity

Requirements: Adobe Photoshop CS6 or CC

Access: Lifetime access

Peace of mind: 30 day money back guarantee

Availability: available online, as well as on iOS and Android

Download options: check course to see if you can download lessons

95% off Learn Autodesk Fusion 360 (Coupon)

Attention: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission at no extra cost to you. Thanks!

Learn Autodesk Fusion 360 - Udemy Coupon

Get Discount


Bonus: download a free guide that reveals 11 tricks for getting the biggest discounts on Udemy courses, including this course.

Coupon & course info

Course Name: Learn Autodesk Fusion 360

Subtitle: Learn the basics of Autodesk’s Fusion 360

Instructor: Taught by CAD Kraft, CAD designer

Category: Design

Subcategory: 3D & Animation

Provided by: Udemy

Price: $20 (before discount)

Free coupon code: See above (no charge for coupon)

Review info & popularity

As of January 2, 2017…

Students: 678 students enrolled

Ratings: 8 reviews

Rank: ranked #177f in Udemy Design Courses

Brief course description

Fusion 360 is a powerful CAD platform that is used for product design and engineering. It connects your entire product development process in a single cloud-based platform that works on both Mac and PC. In this course, you’ll learn all about Fusion 360 straight from the pros with proven tutorials and training to design, build and fabricate your designs.

This course is an overview of the interface where you’ll learn about modeling, sculpting, and rendering workflows in Fusion 360. This course has everything you need to get up and running with Fusion 360 to translate your ideas into elegant CAD drawings and fabrication-ready designs.

Fusion 360 is a great platform to learn for first time users interested in learning CAD. Whether you’re new to Fusion 360 or looking to push your creative limits and grow your design skill set today, then this is a great course to get started with.

(Read more about this course on the official course page.)

CAD Kraft bio

I’m a CAD designer with over 10 years of experience in product development for companies worldwide.

(Learn more about this instructor on the official course page.)

Recommended courses

If you like this course, you might also be interested in:


1. Adobe Photoshop CC For Beginners: Main Features Of Photoshop

Adobe Photoshop CC for beginners: For small business owners & anyone looking to learn Photoshop editing in 1 hour only

Taught by OVC Masters, Online Video Course Masters helping people learn online


2. Coding websites in Dreamweaver CC 2017

Create a beautiful, responsive website and publish it with the newest and most useful tricks from Dreamweaver.

Taught by Daniel Walter Scott, Media Designer, UX Designer, Adobe Certified Instructor


3. VFX Rotoscoping 101 with After Effects and Mocha

A hands-on approach to the secrets and tricks in rotoscoping for live-action films in post-production visual effects.

Taught by Vicki Lau, VFX Professional, Emmys 2014 Attendee, TEDx & SMPTE Speaker


4. Gamification & Behavioral Design: The Octalysis Framework

Learn the 8 Core Drives that motivate us all (beyond Points, Badges, and Leaderboards)

Taught by Yu-kai Chou, International Keynote Speaker & Author in Gamification


5. Blender Modelling Series – Volume One

Learning how modelling works in Blender 3D

Taught by Joe Baily, 3D Artist, qualified teacher and coach

Final details for this Udemy course

Languages: English

Skill level: All Levels

Lectures: 22 lessons

Duration: 1.5 hours of video

What you get: Learn the basics of Fusion 360

Target audience: Anyone interested in getting started in CAD (computer-aided design)

Requirements: Basic 3D design skills with any CAD software are helpful, but not required

Access: Lifetime access

Peace of mind: 30 day money back guarantee

Availability: available online, as well as on iOS and Android

Download options: check course to see if you can download lessons

95% off Maya for Beginners: Complete Guide to 3D Animation in Maya (Coupon & Review)

Attention: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission at no extra cost to you. Thanks!

Maya for Beginners: Complete Guide to 3D Animation in Maya - Udemy Coupon

Get Discount


This is the best Udemy Maya for Beginners: Complete Guide to 3D Animation in Maya coupon code discount for 2025.

So if you’re interested in Video School Online Inc’s “Maya for Beginners: Complete Guide to 3D Animation in Maya” course, which will help you increase your Design skills, get your discount on this Udemy online course up above while it’s still available. (The coupon code will be instantly applied.)

Maya for Beginners: Complete Guide to 3D Animation in Maya review for 2025

In our review of this course, we try to help you answer all of your most important questions about Maya for Beginners: Complete Guide to 3D Animation in Maya as quickly and efficiently as possible, so that you can determine whether this online education training is worth your time and money.

Feel free to jump to whatever question you want answered the most.

Here’s what you’ll learn:

Why use MFBCGT3AIM as an abbreviation of the course name?

During our Maya for Beginners: Complete Guide to 3D Animation in Maya course review, you might sometimes see us refer to it as MFBCGT3AIM for the following 2 reasons:

  1. We created the acronym by taking the first letter of every word (which was very ingenious and innovative, we know)
  2. We’re lazy and MFBCGT3AIM is simpler and easier for reviewing purposes

The full course name is 58 characters long, including blanks, while MFBCGT3AIM is 10 characters long.

You do the math.

Okay, we’ll do the math. We’re saving 48 characters every time we use MFBCGT3AIM.

So, just a heads up that we’ll be using this abbreviation sometimes, so you’re not left scratching your head and wondering what the heck we’re talking about whenever we refer to MFBCGT3AIM throughout the remainder of this review.

Is the Maya for Beginners: Complete Guide to 3D Animation in Maya course for you?

To determine whether Video School Online Inc’s Udemy course is a good fit for you or not, ask yourself the following questions down below.

The more you answer “yes” to each question, the more likely it is that you’ll like this course.

Can you understand what Video School Online Inc’s course is about in 30 seconds or less?

Hopefully, you can easily grasp in 10 seconds or less what this online course is about simply by taking a look at the title that Video School Online Inc chose for the course, “Maya for Beginners: Complete Guide to 3D Animation in Maya”, as well as its subtitle: “Learn everything you need for 3D animation in Autodesk Maya: Modeling, Texturing, Lighting, Rigging, Animation, Dynamics”.

This combo of title and subtitle should be enough to communicate the purpose of the training if Video School Online Inc is a good, clear communicator (which, of course, you want in a teacher).

In our opinion, if you still don’t know what MFBCGT3AIM is about after looking at these two things, then this is a red flag, and you might be better off not taking this class.

Among other things, it means Video School Online Inc hasn’t clearly and accurately conveyed what the course is about and might not be the best teacher for you.

For similar reasons, it’s important that you’re able to clearly understand what Maya for Beginners: Complete Guide to 3D Animation in Maya is all about from the first few lines of the course description.

So take just a few seconds to read the opening lines down below and see what you think of them. 

Opening lines of Video School Online Inc’s official description of MFBCGT3AIM

You can do your own 3D animations in Autodesk Maya!

Learn everything you need to know to get started – taught by a Hollywood professional!

As the industry standard 3D animation software, learning Autodesk Maya is a great skill to help you land a job in the film, music and gaming industry. In this course, you’ll learn how to create your entire animation from scratch.

(Read more about this course on the official course page.)

Does MFBCGT3AIM pass the 30 Seconds Test?

You can read a lot more about Maya for Beginners: Complete Guide to 3D Animation in Maya on the official course page on Udemy, but the point is this: are the title, subtitle, and just the first few lines of the description enough to help you understand what the course is about?

If so, Video School Online Inc has done a good job and can be considered more trustworthy and a good communicator, which are important qualities for any teacher.

And, if not, maybe you’re better off looking at other Design classes that are more clearly defined and more tailored to your specific interests.

Did Maya for Beginners: Complete Guide to 3D Animation in Maya appeal to you in 30 seconds or less?

Now that you’ve done the 30 Second Test with MFBCGT3AIM above, what is your gut reaction to this Design course with only the basic information of its title, subtitle, and the first few opening lines of its official course summary?

Did Video School Online Inc do a good job conveying its subject matter, and did it immediately get your attention and appeal to you?

If so, Video School Online Inc’s online course is certainly worth considering some more.

But if not, perhaps it’s in your best interest to consider some other Design courses instead, because clear communication and being able to hook and maintain your interest are two very important qualities for your online learning success.

Does Video School Online Inc sound like a course instructor you’d like to learn from?

You’ve already learned how to use The 30 Second Test to make a quick evaluation of whether the MFBCGT3AIM course is worth taking.

We have a similar 15 Second Bio Test where you read only the first few lines of an instructor’s background — in this case, Video School Online Inc’s background — and then you make a quick, snap judgment as to whether you think the instructor would be ideal for you.

There is no right or wrong answer. It’s just about going with your gut instinct. What might appeal to one potential student might alienate another, and vice versa.

(FYI, all Udemy instructors, including Video School Online Inc, have a Udemy profile on their course page, so you can easily check for a bio and background on the Udemy website that way. We’re only including the first few lines of the bio down below for The 15 Second Bio Test).

Opening lines from Video School Online Inc’s Udemy bio

Learn creative skills, from absolute beginner to advanced mastery.

(Learn more about this instructor on the official course page.)

What did you think about Video School Online Inc after reading just the first few lines of the bio above?

After reading just the first few lines about Video School Online Inc, did it make you more or less interested in taking the MFBCGT3AIM course?

And did it make you feel like Video School Online Inc was more or less credible and qualified to teach Maya for Beginners: Complete Guide to 3D Animation in Maya?

Finally, overall, did you feel like you’d receive the proper training from the instructor of this Design course?

As always, we encourage you to listen to your gut instinct, which is different for every student.

Are the MFBCGT3AIM lessons clear, specific, and organized well?

Part of the (good) problem with Udemy’s online courses, such as the Maya for Beginners: Complete Guide to 3D Animation in Maya course, is that the instructors are constantly updating them, including adding and renaming lessons.

So it makes no sense whatsoever for us to list out all the modules and lessons in the MFBCGT3AIM course here, because you can just as easily go to the Udemy course page and get all the up to date course structure as of right now.

We do, however, have some tips about reviewing Video School Online Inc’s course structure, so that you can get a better sense of whether this program is worth your time or not.

In a nutshell, you want to scan the the titles of the different sections and lessons of the course, and verify that they are clearly relevant to the course’s name, Maya for Beginners: Complete Guide to 3D Animation in Maya, as well as the course’s subtitle, Learn everything you need for 3D animation in Autodesk Maya: Modeling, Texturing, Lighting, Rigging, Animation, Dynamics.

If the section names and lessons are clear, specific, and relevant, then it’s a good sign that MFBCGT3AIM is potentially a good, useful course for you, and you can have more confidence in Video School Online Inc’s teaching abilities and lesson planning.

On the other hand, if the module names are confusing, vague, or irrelevant, then this is a red flag, which might indicate that the program is worth skipping.

Have you taken some free lessons from Video School Online Inc that you enjoyed?

Have you already learned something from Video School Online Inc that you valued or enjoyed?

For example, does the Maya for Beginners: Complete Guide to 3D Animation in Maya training have some free lessons that you can try? (Almost all Udemy instructors will give you at least one or two lessons for free to help you make a better, more informed decision before enrolling in their course.)

But if you weren’t able to get any MFBCGT3AIM lessons for free, have you perhaps watched a YouTube video by Video School Online Inc, or perhaps come across this instructor’s thoughts on Quora, Facebook, LinkedIn, Github, Reddit, or some other platform?

Or have you perhaps even taken one of Video School Online Inc’s free courses or free webinars? (Many online teachers offer these freebies, which is a great way to get to know them and evaluate their teaching methods before buying one of their courses.)

In any case, the more familiar you are with Video School Online Inc’s teaching methods, and the more you enjoy them, the more likely it is that Maya for Beginners: Complete Guide to 3D Animation in Maya will be a good fit for you.

(P.S.: We strongly encourage you to seek out some free instruction from Video School Online Inc before purchasing this course, since it’s one of the best ways to determine whether MFBCGT3AIM will be helpful for you.)

Are “Maya for Beginners: Complete Guide to 3D Animation in Maya” reviews generally positive?

On the bottom of the MFBCGT3AIM page, you can read student reviews of the class.

Prior to August 24, 2025, there were 11,328 students enrolled, 3,788 reviews / ratings, and it was overall rated 4.6 out of 5.

Obviously, the more highly other students rate MFBCGT3AIM the better, but no matter what, keep an open mind when reading the reviews, since you might still like a course a great deal that other students dislike.

After all, everyone’s got their own opinion.

We recommend that you spend only a couple minutes scanning the MFBCGT3AIM reviews to get an overall sense of them. You don’t have to read each one!

Is Video School Online Inc responsive to student questions in the MFBCGT3AIM training?

You can see what other students have to say about this in their MFBCGT3AIM reviews.

But, our simple all time favorite way of gauging an instructor’s responsiveness is to simply email the instructor and see if or how they respond.

In this case, Udemy has a messaging system for students / anyone who has an account, and you can send Video School Online Inc a message through this system quite easily, even if you haven’t bought MFBCGT3AIM yet.

For example, you could say, “Hi, and I came across MFBCGT3AIM while looking at Design courses on Udemy. If I enroll in your training, would you mind if I asked you any questions along the way?”

If you use this approach, the response (or lack of response) from the professor will tell you everything.

Obviously, the quicker the response the better!

Are you comfortable going through the lessons in Maya for Beginners: Complete Guide to 3D Animation in Maya on your own, online?

This is a big one, because Maya for Beginners: Complete Guide to 3D Animation in Maya is an online course as opposed to a course that you physically take in a classroom.

Of course, you will need a good internet connection to have access to the course material and lessons, but beyond that, you also have to be comfortable being self motivated to some degree, being on your own, and not having any physical interaction with any of the other students taking Maya for Beginners: Complete Guide to 3D Animation in Maya.

Yes, you will be able to interact with the students and the teacher, Video School Online Inc, online, but it’s a different kind of experience than what you’d get if you were interacting with them in person.

This is not a big deal to most people, but it might be something for you to consider if you feel like you do better taking classes in person rather than learning online.

Do the pros / benefits of MFBCGT3AIM make it worth your time?

Ideally, if you’ve gone through the evaluation steps above, you have a list of positive things about the Maya for Beginners: Complete Guide to 3D Animation in Maya training that looks something like this:

  • The purpose of MFBCGT3AIM can be clearly grasped and understood, and its lesson structure is clear, specific, and well organized
  • Video School Online Inc is well qualified to teach this subject matter, has good teaching abilities, and is responsive to student questions
  • Other MFBCGT3AIM students have great things to say about the program

Other benefits include:

  • You get to go through MFBCGT3AIM at your own pace
  • You join a community of 11,328 other students taking the course
  • You get lifetime access to the training
  • All updates to the training are free
  • You have a 30 day money back guarantee

Even if there are some things that you don’t like about the program, so what?

The question is simply this: do you think that MFBCGT3AIM would be worth your time, even if there are some things that could be better about it?

Can you comfortably afford MFBCGT3AIM?

Can you comfortably afford the cost of Maya for Beginners: Complete Guide to 3D Animation in Maya?

This is an important question to answer, because even if you think MFBCGT3AIM sounds like the greatest online class in the world, it’s still not worth taking if you can’t comfortably afford it!

Before August 24, 2025, the price was $19.99 before any Udemy discount, and you were able to pay with a credit card.

Keep in mind that this is a Udemy online course, and there’s a great chance that you can get a solid discount on MFBCGT3AIM with Udemy coupons / promo codes, especially with the strategies we provide for helping you find the best, most popular coupons available.

We’ll cover that in greater detail in the next section, because at the end of the day, its important that you can learn whatever you want to learn without getting into a lot of credit card debt.

How can you maximize your discount on Maya for Beginners: Complete Guide to 3D Animation in Maya?

By far, the easiest way to get the best and biggest discount on this course is to use the Maya for Beginners: Complete Guide to 3D Animation in Maya discount code link at the top of this page.

It will instantly give you the best coupon code we could find for Video School Online Inc’s online training.

We don’t believe there’s a bigger discount than the one we provided, but if for some reason you’d like to try find one, you can use the methods below to hunt for the best MFBCGT3AIM course coupons and promo codes you can find.

FYI, the methods below will help you not just with getting MFBCGT3AIM for a better price, but also with any other Video School Online Inc Udemy course that you’d like to get for cheaper.

How can Google help you get a MFBCGT3AIM discount?

To use this method, do a Google search for the MFBCGT3AIM training, but in your search query, be sure to add words like coupon code, promo code, deal, sale, discount, and Udemy.

For example, you might do a search for “Udemy Maya for Beginners: Complete Guide to 3D Animation in Maya promo code” or “Maya for Beginners: Complete Guide to 3D Animation in Maya udemy coupon codes” and see what turns up.

Similarly, you can use the same combination of search terms with Video School Online Inc’s name and see what happens.

For example, you might do a Google search for “Video School Online Inc Udemy coupons” or “Video School Online Inc course coupon codes” and see if that helps you.

However, in general, it’s far more powerful to do a search for deals and coupon codes with the actual training’s name, than with the instructor’s name.

So in this case, for example, prioritize searches for “Maya for Beginners: Complete Guide to 3D Animation in Maya coupons” rather than “Video School Online Inc coupons”.

How can a Udemy sale get you MFBCGT3AIM for cheaper?

Every once in while, Udemy will do a sitewide sale where they offer all (or almost all) their courses at a discounted price. For example, one of the best sales is where every course is only $10 or $9.99.

So, if you’re interested in saving as much money as possible, you could wait and see if you can get MFBCGT3AIM for this cheaper Udemy sale price one day.

The problem is that these sales only occur sporadically, so you might be waiting for a while. Also, if Video School Online Inc decides not to participate in the site wide sale, then you won’t get a discount on MFBCGT3AIM, even though you could get a great discount on almost any other class at Udemy!

To understand this, think of there as being two different coupon categories for the MFBCGT3AIM course. Category one is an official Udemy coupon (which instructors can opt out of), while category two is a coupon offered directly by the instructor.

At the end of the day, it doesn’t matter what kind of a coupon tag you’re dealing with (for example, “officially from Udemy” or “officially from the instructor”), as long as long as as you’re dealing with active coupons that get you a better price.

How can you get a MFBCGT3AIM discount from Video School Online Inc?

If you’re really serious about getting “Maya for Beginners: Complete Guide to 3D Animation in Maya” for the cheapest price possible, then perhaps one of the most powerful things you can do is get a coupon code straight from Video School Online Inc, instead of waiting for a Udemy sale.

To do this, you can use either the direct approach or an indirect approach to try to get your discount.

With the direct approach, the big idea is to simply get Video School Online Inc’s contact info in some way or another (whether it’s email, or Twitter, or whatever else).

Then you send a message saying something like “I’m interested in enrolling in Maya for Beginners: Complete Guide to 3D Animation in Maya. Do you happen to currently have an active coupon code for it that I could use?” (And then, hopefully, you’ll get a reply with your discount code.)

On the other hand, with the indirect approach, you join Video School Online Inc’s mailing list, if you can find it, and then you hope that at some time MFBCGT3AIM will be promoted to you at a discount.

By far, the more powerful approach is the direct approach, because it tends to get results faster. But you can experiment with the indirect approach and see if it works for you.

Can you get MFBCGT3AIM for free?

Of course, the best possible price for the MFBCGT3AIM training is free! As in, you pay no money whatsoever.

And guess what? Sometimes Udemy instructors provide coupon codes that enable students to take their courses for free. So, perhaps it’s possible that Video School Online Inc has done this.

Basically, if you’re trying to get this program for free, you will want to search for the course’s name along with other words like free coupon, or 100 off coupon.

For example, you might do a google search for “Maya for Beginners: Complete Guide to 3D Animation in Maya free coupon” or “Maya for Beginners: Complete Guide to 3D Animation in Maya 100 off coupon” and see what happens.

But keep this in mind: often, Udemy teachers will offer a free coupon for their course when it first opens to get some publicity and reviews. And then, after a few days, they’ll make the coupon expired.

So even Video School Online Inc has offered free coupons for MFBCGT3AIM in the past, the odds are likely they will all be currently expired. This is a common pattern that we have found.

What about a MFBCGT3AIM free download?

It’s important to understand that there’s a difference between getting full access to the MFBCGT3AIM training for free legally with a free coupon code vs. finding a way to download MFBCGT3AIM illegally.

If you really want to go the download route, you can do a google search for something like “Maya for Beginners: Complete Guide to 3D Animation in Maya download”.

And if that doesn’t get you the results you want, you can add the word “free” to your search.

For example, perhaps you could do a google search for “Maya for Beginners: Complete Guide to 3D Animation in Maya free download”.

However, even if you get some results from these searches, we do not recommend that you take this course of action.

First of all, there are some shady sites out there that could be trying to infect your computer.

Second, Video School Online Inc created this course and deserves monetary compensation for it.

And third, if you go the free download route, you’ll be missing out on a lot of value, because you won’t be able to ask the instructor questions or interact with the other 11,328 students enrolled in the program.

Can you get a refund on Maya for Beginners: Complete Guide to 3D Animation in Maya if you don’t like it?

Let’s say that you used our tips above, and you were able to buy the MFBCGT3AIM training at a fantastic discounted price. So at this point, you’re super excited.

Then, you actually dive into Video School Online Inc’s course, and you discover that it just isn’t for you for whatever reason.

And now you’re super bummed, because you feel like it wasn’t money well spent.

Well, guess what?

Udemy offers a rock solid 30 day money back guarantee on all their courses, so you can get a refund on MFBCGT3AIM no matter what. And this means there is absolutely no risk.

Indeed, even if you left a super negative, critical review on the MFBCGT3AIM training, and then asked for your money back, you’d get a refund. For better or worse, there’s nothing Video School Online Inc could do about it, since it is simply Udemy policy.

To sum it up: yes, you can get a full refund, so at the end of the day, don’t worry about the possibility of purchasing MFBCGT3AIM and not liking it, since you can always get your money back.

What is OCP’s overall rating of Maya for Beginners: Complete Guide to 3D Animation in Maya?

During this MFBCGT3AIM review, you’ve learned about some of the unusual ways we like to evaluate courses, such as with The 30 Second Test and The 15 Second Bio Test.

So our overall review process is perhaps a little unusual and different from other reviews out there. Keep this in mind when you consider the overall rating / score that we have given this course.

Anyway, after taking a look at the MFBCGT3AIM training, the instructor, Video School Online Inc, and reading what other students have said about this program, we give it an overall rating of 4.8 out of 5.

Ultimately, though, what matters most is what you would rate it based on the same criteria.

What are some potential alternatives to Maya for Beginners: Complete Guide to 3D Animation in Maya?

If you like this course, you might also be interested in:


1. Adobe Photoshop CC – Advanced Training Course

You’ll learn advanced Photoshop techniques like Photoshop retouching & Graphic Design tutorials.

Taught by Adobe Certified Instructor & Adobe Certified Expert


2. T-Shirt Design Workshop 01: Foundation

Design a t-shirt like a professional: specialty printing methods, fabrics, inks, dyes, and washes.

Taught by Graphic Designer


3. Blender Character Modeling For Beginners HD

Learn to Model a 3D Character In Blender

Taught by Artist


4. The Complete WordPress Website Course

Master The Complete WordPress – Build any Dynamic WordPress Website without Programming with WordPress Custom Post types

Taught by Full stack Web Developer and SEO Expert


5. Kinetic Typography in After Effects: Motion Graphics Course

Start creating your own kinetic typography videos, titles, and motion graphics in Adobe After Effects in just minutes!

Taught by Best Selling Instructor, 900,000+ Students

TLDR: Just the quick facts about MFBCGT3AIM

Okay, if all of this was Too Long Didn’t Read for you, here is the Cliff’s Notes version of what MFBCGT3AIM’s online training is all about:

MFBCGT3AIM coupon & course info

Course Name: Maya for Beginners: Complete Guide to 3D Animation in Maya

Subtitle: Learn everything you need for 3D animation in Autodesk Maya: Modeling, Texturing, Lighting, Rigging, Animation, Dynamics

Instructor: Taught by Video School Online Inc

Category: Design

Subcategory: 3D & Animation

Provided by: Udemy

Price: $19.99 (before discount)

Free coupon code: Get Udemy coupon code discount at top of page (no charge for coupon, especially since we are compensated for referrals via affiliate marketing)

MFBCGT3AIM review info & popularity

Prior to August 24, 2025…

Students: 11,328 students enrolled

Ratings: 3,788 reviews

Rank: ranked #111 in Udemy Design Courses in Udemy Design Courses

Rankings tip: rankings change all the time, so even if Maya for Beginners: Complete Guide to 3D Animation in Maya is a bestseller or one of the top Udemy courses one year, it doesn’t mean it will be a top Udemy course the next year

MFBCGT3AIM final details

Languages: English

Skill level: All Levels

Lectures: 136 lectures lectures lessons

Duration: 25.5 total hours hours of video

What you get: You will become comfortable using Autodesk Maya to model, texture, rig, animate, dynamics, light, and render

Target audience: We designed this course for complete beginners who want to get started with Autodesk Maya.

Requirements: You should have Autodesk Maya to follow along with the course

Access: Lifetime access

Peace of mind: 30 day money back guarantee

Availability: available online, as well as on iOS and Android

Download options: check course to see if you can download lessons

95% off 3D Modeling Piped Systems in AutoCAD (Coupon & Review)

Attention: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission at no extra cost to you. Thanks!

3D Modeling Piped Systems in AutoCAD - Udemy Coupon

Get Discount


This is the best Udemy 3D Modeling Piped Systems in AutoCAD coupon code discount for 2025.

So if you’re interested in Paul Lynn’s “3D Modeling Piped Systems in AutoCAD” course, which will help you increase your Design skills, get your discount on this Udemy online course up above while it’s still available. (The coupon code will be instantly applied.)

3D Modeling Piped Systems in AutoCAD review for 2025

In our review of this course, we try to help you answer all of your most important questions about 3D Modeling Piped Systems in AutoCAD as quickly and efficiently as possible, so that you can determine whether this online education training is worth your time and money.

Feel free to jump to whatever question you want answered the most.

Here’s what you’ll learn:

Why use 3MPSIA as an abbreviation of the course name?

During our 3D Modeling Piped Systems in AutoCAD course review, you might sometimes see us refer to it as 3MPSIA for the following 2 reasons:

  1. We created the acronym by taking the first letter of every word (which was very ingenious and innovative, we know)
  2. We’re lazy and 3MPSIA is simpler and easier for reviewing purposes

The full course name is 36 characters long, including blanks, while 3MPSIA is 6 characters long.

You do the math.

Okay, we’ll do the math. We’re saving 30 characters every time we use 3MPSIA.

So, just a heads up that we’ll be using this abbreviation sometimes, so you’re not left scratching your head and wondering what the heck we’re talking about whenever we refer to 3MPSIA throughout the remainder of this review.

Is the 3D Modeling Piped Systems in AutoCAD course for you?

To determine whether Paul Lynn’s Udemy course is a good fit for you or not, ask yourself the following questions down below.

The more you answer “yes” to each question, the more likely it is that you’ll like this course.

Can you understand what Paul Lynn’s course is about in 30 seconds or less?

Hopefully, you can easily grasp in 10 seconds or less what this online course is about simply by taking a look at the title that Paul Lynn chose for the course, “3D Modeling Piped Systems in AutoCAD”, as well as its subtitle: “From absolute ZERO all the way to creating sophisticated, 3D models and professional drawing packages in AutoCAD”.

This combo of title and subtitle should be enough to communicate the purpose of the training if Paul Lynn is a good, clear communicator (which, of course, you want in a teacher).

In our opinion, if you still don’t know what 3MPSIA is about after looking at these two things, then this is a red flag, and you might be better off not taking this class.

Among other things, it means Paul Lynn hasn’t clearly and accurately conveyed what the course is about and might not be the best teacher for you.

For similar reasons, it’s important that you’re able to clearly understand what 3D Modeling Piped Systems in AutoCAD is all about from the first few lines of the course description.

So take just a few seconds to read the opening lines down below and see what you think of them. 

Opening lines of Paul Lynn’s official description of 3MPSIA

Many people think you need an Engineering degree to design piped systems such as chemical plants and filtration systems, but that’s not the case. People are often intimidated by AutoCAD and think it takes years of experience to operate effectively, but this too is a misconception.

You are going to walk into this course perhaps never having even SEEN AutoCAD before, and by the end, you’ll be CONFIDENTLY designing complex, piped systems from scratch. What’s more, you’ll be creating virtual, 3D solid models of these systems and then generating all of the drawings necessary to fabricate and assemble your system!

Once you learn the material in this course, there really is no limit to what you’ll be able to design, model and draw.

(Read more about this course on the official course page.)

Does 3MPSIA pass the 30 Seconds Test?

You can read a lot more about 3D Modeling Piped Systems in AutoCAD on the official course page on Udemy, but the point is this: are the title, subtitle, and just the first few lines of the description enough to help you understand what the course is about?

If so, Paul Lynn has done a good job and can be considered more trustworthy and a good communicator, which are important qualities for any teacher.

And, if not, maybe you’re better off looking at other Design classes that are more clearly defined and more tailored to your specific interests.

Did 3D Modeling Piped Systems in AutoCAD appeal to you in 30 seconds or less?

Now that you’ve done the 30 Second Test with 3MPSIA above, what is your gut reaction to this Design course with only the basic information of its title, subtitle, and the first few opening lines of its official course summary?

Did Paul Lynn do a good job conveying its subject matter, and did it immediately get your attention and appeal to you?

If so, Paul Lynn’s online course is certainly worth considering some more.

But if not, perhaps it’s in your best interest to consider some other Design courses instead, because clear communication and being able to hook and maintain your interest are two very important qualities for your online learning success.

Does Paul Lynn sound like a course instructor you’d like to learn from?

You’ve already learned how to use The 30 Second Test to make a quick evaluation of whether the 3MPSIA course is worth taking.

We have a similar 15 Second Bio Test where you read only the first few lines of an instructor’s background — in this case, Paul Lynn’s background — and then you make a quick, snap judgment as to whether you think the instructor would be ideal for you.

There is no right or wrong answer. It’s just about going with your gut instinct. What might appeal to one potential student might alienate another, and vice versa.

(FYI, all Udemy instructors, including Paul Lynn, have a Udemy profile on their course page, so you can easily check for a bio and background on the Udemy website that way. We’re only including the first few lines of the bio down below for The 15 Second Bio Test).

Opening lines from Paul Lynn’s Udemy bio

My background includes industrial automation and mechanical design.  By degree, I’m an MBA, however after a few years on the road full-time as a management consultant, I fell into and in love with engineering.

(Learn more about this instructor on the official course page.)

What did you think about Paul Lynn after reading just the first few lines of the bio above?

After reading just the first few lines about Paul Lynn, did it make you more or less interested in taking the 3MPSIA course?

And did it make you feel like Paul Lynn was more or less credible and qualified to teach 3D Modeling Piped Systems in AutoCAD?

Finally, overall, did you feel like you’d receive the proper training from the instructor of this Design course?

As always, we encourage you to listen to your gut instinct, which is different for every student.

Are the 3MPSIA lessons clear, specific, and organized well?

Part of the (good) problem with Udemy’s online courses, such as the 3D Modeling Piped Systems in AutoCAD course, is that the instructors are constantly updating them, including adding and renaming lessons.

So it makes no sense whatsoever for us to list out all the modules and lessons in the 3MPSIA course here, because you can just as easily go to the Udemy course page and get all the up to date course structure as of right now.

We do, however, have some tips about reviewing Paul Lynn’s course structure, so that you can get a better sense of whether this program is worth your time or not.

In a nutshell, you want to scan the the titles of the different sections and lessons of the course, and verify that they are clearly relevant to the course’s name, 3D Modeling Piped Systems in AutoCAD, as well as the course’s subtitle, From absolute ZERO all the way to creating sophisticated, 3D models and professional drawing packages in AutoCAD.

If the section names and lessons are clear, specific, and relevant, then it’s a good sign that 3MPSIA is potentially a good, useful course for you, and you can have more confidence in Paul Lynn’s teaching abilities and lesson planning.

On the other hand, if the module names are confusing, vague, or irrelevant, then this is a red flag, which might indicate that the program is worth skipping.

Have you taken some free lessons from Paul Lynn that you enjoyed?

Have you already learned something from Paul Lynn that you valued or enjoyed?

For example, does the 3D Modeling Piped Systems in AutoCAD training have some free lessons that you can try? (Almost all Udemy instructors will give you at least one or two lessons for free to help you make a better, more informed decision before enrolling in their course.)

But if you weren’t able to get any 3MPSIA lessons for free, have you perhaps watched a YouTube video by Paul Lynn, or perhaps come across this instructor’s thoughts on Quora, Facebook, LinkedIn, Github, Reddit, or some other platform?

Or have you perhaps even taken one of Paul Lynn’s free courses or free webinars? (Many online teachers offer these freebies, which is a great way to get to know them and evaluate their teaching methods before buying one of their courses.)

In any case, the more familiar you are with Paul Lynn’s teaching methods, and the more you enjoy them, the more likely it is that 3D Modeling Piped Systems in AutoCAD will be a good fit for you.

(P.S.: We strongly encourage you to seek out some free instruction from Paul Lynn before purchasing this course, since it’s one of the best ways to determine whether 3MPSIA will be helpful for you.)

Are “3D Modeling Piped Systems in AutoCAD” reviews generally positive?

On the bottom of the 3MPSIA page, you can read student reviews of the class.

Prior to August 24, 2025, there were 1,848 students enrolled, 734 reviews / ratings, and it was overall rated 4.7 out of 5.

Obviously, the more highly other students rate 3MPSIA the better, but no matter what, keep an open mind when reading the reviews, since you might still like a course a great deal that other students dislike.

After all, everyone’s got their own opinion.

We recommend that you spend only a couple minutes scanning the 3MPSIA reviews to get an overall sense of them. You don’t have to read each one!

Is Paul Lynn responsive to student questions in the 3MPSIA training?

You can see what other students have to say about this in their 3MPSIA reviews.

But, our simple all time favorite way of gauging an instructor’s responsiveness is to simply email the instructor and see if or how they respond.

In this case, Udemy has a messaging system for students / anyone who has an account, and you can send Paul Lynn a message through this system quite easily, even if you haven’t bought 3MPSIA yet.

For example, you could say, “Hi, and I came across 3MPSIA while looking at Design courses on Udemy. If I enroll in your training, would you mind if I asked you any questions along the way?”

If you use this approach, the response (or lack of response) from the professor will tell you everything.

Obviously, the quicker the response the better!

Are you comfortable going through the lessons in 3D Modeling Piped Systems in AutoCAD on your own, online?

This is a big one, because 3D Modeling Piped Systems in AutoCAD is an online course as opposed to a course that you physically take in a classroom.

Of course, you will need a good internet connection to have access to the course material and lessons, but beyond that, you also have to be comfortable being self motivated to some degree, being on your own, and not having any physical interaction with any of the other students taking 3D Modeling Piped Systems in AutoCAD.

Yes, you will be able to interact with the students and the teacher, Paul Lynn, online, but it’s a different kind of experience than what you’d get if you were interacting with them in person.

This is not a big deal to most people, but it might be something for you to consider if you feel like you do better taking classes in person rather than learning online.

Do the pros / benefits of 3MPSIA make it worth your time?

Ideally, if you’ve gone through the evaluation steps above, you have a list of positive things about the 3D Modeling Piped Systems in AutoCAD training that looks something like this:

  • The purpose of 3MPSIA can be clearly grasped and understood, and its lesson structure is clear, specific, and well organized
  • Paul Lynn is well qualified to teach this subject matter, has good teaching abilities, and is responsive to student questions
  • Other 3MPSIA students have great things to say about the program

Other benefits include:

  • You get to go through 3MPSIA at your own pace
  • You join a community of 1,848 other students taking the course
  • You get lifetime access to the training
  • All updates to the training are free
  • You have a 30 day money back guarantee

Even if there are some things that you don’t like about the program, so what?

The question is simply this: do you think that 3MPSIA would be worth your time, even if there are some things that could be better about it?

Can you comfortably afford 3MPSIA?

Can you comfortably afford the cost of 3D Modeling Piped Systems in AutoCAD?

This is an important question to answer, because even if you think 3MPSIA sounds like the greatest online class in the world, it’s still not worth taking if you can’t comfortably afford it!

Before August 24, 2025, the price was $13.99 before any Udemy discount, and you were able to pay with a credit card.

Keep in mind that this is a Udemy online course, and there’s a great chance that you can get a solid discount on 3MPSIA with Udemy coupons / promo codes, especially with the strategies we provide for helping you find the best, most popular coupons available.

We’ll cover that in greater detail in the next section, because at the end of the day, its important that you can learn whatever you want to learn without getting into a lot of credit card debt.

How can you maximize your discount on 3D Modeling Piped Systems in AutoCAD?

By far, the easiest way to get the best and biggest discount on this course is to use the 3D Modeling Piped Systems in AutoCAD discount code link at the top of this page.

It will instantly give you the best coupon code we could find for Paul Lynn’s online training.

We don’t believe there’s a bigger discount than the one we provided, but if for some reason you’d like to try find one, you can use the methods below to hunt for the best 3MPSIA course coupons and promo codes you can find.

FYI, the methods below will help you not just with getting 3MPSIA for a better price, but also with any other Paul Lynn Udemy course that you’d like to get for cheaper.

How can Google help you get a 3MPSIA discount?

To use this method, do a Google search for the 3MPSIA training, but in your search query, be sure to add words like coupon code, promo code, deal, sale, discount, and Udemy.

For example, you might do a search for “Udemy 3D Modeling Piped Systems in AutoCAD promo code” or “3D Modeling Piped Systems in AutoCAD udemy coupon codes” and see what turns up.

Similarly, you can use the same combination of search terms with Paul Lynn’s name and see what happens.

For example, you might do a Google search for “Paul Lynn Udemy coupons” or “Paul Lynn course coupon codes” and see if that helps you.

However, in general, it’s far more powerful to do a search for deals and coupon codes with the actual training’s name, than with the instructor’s name.

So in this case, for example, prioritize searches for “3D Modeling Piped Systems in AutoCAD coupons” rather than “Paul Lynn coupons”.

How can a Udemy sale get you 3MPSIA for cheaper?

Every once in while, Udemy will do a sitewide sale where they offer all (or almost all) their courses at a discounted price. For example, one of the best sales is where every course is only $10 or $9.99.

So, if you’re interested in saving as much money as possible, you could wait and see if you can get 3MPSIA for this cheaper Udemy sale price one day.

The problem is that these sales only occur sporadically, so you might be waiting for a while. Also, if Paul Lynn decides not to participate in the site wide sale, then you won’t get a discount on 3MPSIA, even though you could get a great discount on almost any other class at Udemy!

To understand this, think of there as being two different coupon categories for the 3MPSIA course. Category one is an official Udemy coupon (which instructors can opt out of), while category two is a coupon offered directly by the instructor.

At the end of the day, it doesn’t matter what kind of a coupon tag you’re dealing with (for example, “officially from Udemy” or “officially from the instructor”), as long as long as as you’re dealing with active coupons that get you a better price.

How can you get a 3MPSIA discount from Paul Lynn?

If you’re really serious about getting “3D Modeling Piped Systems in AutoCAD” for the cheapest price possible, then perhaps one of the most powerful things you can do is get a coupon code straight from Paul Lynn, instead of waiting for a Udemy sale.

To do this, you can use either the direct approach or an indirect approach to try to get your discount.

With the direct approach, the big idea is to simply get Paul Lynn’s contact info in some way or another (whether it’s email, or Twitter, or whatever else).

Then you send a message saying something like “I’m interested in enrolling in 3D Modeling Piped Systems in AutoCAD. Do you happen to currently have an active coupon code for it that I could use?” (And then, hopefully, you’ll get a reply with your discount code.)

On the other hand, with the indirect approach, you join Paul Lynn’s mailing list, if you can find it, and then you hope that at some time 3MPSIA will be promoted to you at a discount.

By far, the more powerful approach is the direct approach, because it tends to get results faster. But you can experiment with the indirect approach and see if it works for you.

Can you get 3MPSIA for free?

Of course, the best possible price for the 3MPSIA training is free! As in, you pay no money whatsoever.

And guess what? Sometimes Udemy instructors provide coupon codes that enable students to take their courses for free. So, perhaps it’s possible that Paul Lynn has done this.

Basically, if you’re trying to get this program for free, you will want to search for the course’s name along with other words like free coupon, or 100 off coupon.

For example, you might do a google search for “3D Modeling Piped Systems in AutoCAD free coupon” or “3D Modeling Piped Systems in AutoCAD 100 off coupon” and see what happens.

But keep this in mind: often, Udemy teachers will offer a free coupon for their course when it first opens to get some publicity and reviews. And then, after a few days, they’ll make the coupon expired.

So even Paul Lynn has offered free coupons for 3MPSIA in the past, the odds are likely they will all be currently expired. This is a common pattern that we have found.

What about a 3MPSIA free download?

It’s important to understand that there’s a difference between getting full access to the 3MPSIA training for free legally with a free coupon code vs. finding a way to download 3MPSIA illegally.

If you really want to go the download route, you can do a google search for something like “3D Modeling Piped Systems in AutoCAD download”.

And if that doesn’t get you the results you want, you can add the word “free” to your search.

For example, perhaps you could do a google search for “3D Modeling Piped Systems in AutoCAD free download”.

However, even if you get some results from these searches, we do not recommend that you take this course of action.

First of all, there are some shady sites out there that could be trying to infect your computer.

Second, Paul Lynn created this course and deserves monetary compensation for it.

And third, if you go the free download route, you’ll be missing out on a lot of value, because you won’t be able to ask the instructor questions or interact with the other 1,848 students enrolled in the program.

Can you get a refund on 3D Modeling Piped Systems in AutoCAD if you don’t like it?

Let’s say that you used our tips above, and you were able to buy the 3MPSIA training at a fantastic discounted price. So at this point, you’re super excited.

Then, you actually dive into Paul Lynn’s course, and you discover that it just isn’t for you for whatever reason.

And now you’re super bummed, because you feel like it wasn’t money well spent.

Well, guess what?

Udemy offers a rock solid 30 day money back guarantee on all their courses, so you can get a refund on 3MPSIA no matter what. And this means there is absolutely no risk.

Indeed, even if you left a super negative, critical review on the 3MPSIA training, and then asked for your money back, you’d get a refund. For better or worse, there’s nothing Paul Lynn could do about it, since it is simply Udemy policy.

To sum it up: yes, you can get a full refund, so at the end of the day, don’t worry about the possibility of purchasing 3MPSIA and not liking it, since you can always get your money back.

What is OCP’s overall rating of 3D Modeling Piped Systems in AutoCAD?

During this 3MPSIA review, you’ve learned about some of the unusual ways we like to evaluate courses, such as with The 30 Second Test and The 15 Second Bio Test.

So our overall review process is perhaps a little unusual and different from other reviews out there. Keep this in mind when you consider the overall rating / score that we have given this course.

Anyway, after taking a look at the 3MPSIA training, the instructor, Paul Lynn, and reading what other students have said about this program, we give it an overall rating of 4.8 out of 5.

Ultimately, though, what matters most is what you would rate it based on the same criteria.

What are some potential alternatives to 3D Modeling Piped Systems in AutoCAD?

If you like this course, you might also be interested in:


1. Prepare for the Adobe Certified Expert in Photoshop CC exam

The ultimate guide on how to successfully prepare for the Adobe Photoshop Expert exam by an Adobe Certified Instructor.

Taught by Yes I’m a Designer


2. Pro Engineer Creo Fundamental 3D design course

Learn fundamentals of creo parametric from scratch including part design,drawing,assembly

Taught by Ultimate Destination for All Computer Course


3. Photoshop Visualisation for Architects

Create a Render with No Render Engines! Just Photoshop

Taught by Architectural Representation Experts


4. How To Create A WordPress Website | Divi Theme 3.0!

Learn to Make a professional website in less than 1 hour. No coding required.

Taught by Professional Webdesigner


5. Axure RP 8 – Comprehensive training for UX Design

Learn the basic, intermediate and advance level Axure RP skills for creating interactive prototype for web and mobile.

Taught by Sr User Experience Designer

TLDR: Just the quick facts about 3MPSIA

Okay, if all of this was Too Long Didn’t Read for you, here is the Cliff’s Notes version of what 3MPSIA’s online training is all about:

3MPSIA coupon & course info

Course Name: 3D Modeling Piped Systems in AutoCAD

Subtitle: From absolute ZERO all the way to creating sophisticated, 3D models and professional drawing packages in AutoCAD

Instructor: Taught by Paul Lynn

Category: Design

Subcategory: 3D & Animation

Provided by: Udemy

Price: $13.99 (before discount)

Free coupon code: Get Udemy coupon code discount at top of page (no charge for coupon, especially since we are compensated for referrals via affiliate marketing)

3MPSIA review info & popularity

Prior to August 24, 2025…

Students: 1,848 students enrolled

Ratings: 734 reviews

Rank: ranked #246 in Udemy Design Courses in Udemy Design Courses

Rankings tip: rankings change all the time, so even if 3D Modeling Piped Systems in AutoCAD is a bestseller or one of the top Udemy courses one year, it doesn’t mean it will be a top Udemy course the next year

3MPSIA final details

Languages: English

Skill level: All Levels

Lectures: 77 lectures lectures lessons

Duration: 11 total hours hours of video

What you get: Model and draw an entire piped system in AutoCAD from scratch

Target audience: Anybody wanting to learn how to create 3D models and clean, professional drawings of piped systems will find all they need in this course.

Requirements: There are no prerequisites for this course. You will be able to download and install a trial version of AutoCAD to practice and complete the assignments.

Access: Lifetime access

Peace of mind: 30 day money back guarantee

Availability: available online, as well as on iOS and Android

Download options: check course to see if you can download lessons

95% off Create a Game Character: Blender, Substance Painter, Unity (Coupon & Review)

Attention: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission at no extra cost to you. Thanks!

Create a Game Character: Blender, Substance Painter, Unity - Udemy Coupon

Get Discount


This is the best Udemy Create a Game Character: Blender, Substance Painter, Unity coupon code discount for 2025.

So if you’re interested in Darrin Lile’s “Create a Game Character: Blender, Substance Painter, Unity” course, which will help you increase your Design skills, get your discount on this Udemy online course up above while it’s still available. (The coupon code will be instantly applied.)

Create a Game Character: Blender, Substance Painter, Unity review for 2025

In our review of this course, we try to help you answer all of your most important questions about Create a Game Character: Blender, Substance Painter, Unity as quickly and efficiently as possible, so that you can determine whether this online education training is worth your time and money.

Feel free to jump to whatever question you want answered the most.

Here’s what you’ll learn:

Why use CAGCBSPU as an abbreviation of the course name?

During our Create a Game Character: Blender, Substance Painter, Unity course review, you might sometimes see us refer to it as CAGCBSPU for the following 2 reasons:

  1. We created the acronym by taking the first letter of every word (which was very ingenious and innovative, we know)
  2. We’re lazy and CAGCBSPU is simpler and easier for reviewing purposes

The full course name is 58 characters long, including blanks, while CAGCBSPU is 8 characters long.

You do the math.

Okay, we’ll do the math. We’re saving 50 characters every time we use CAGCBSPU.

So, just a heads up that we’ll be using this abbreviation sometimes, so you’re not left scratching your head and wondering what the heck we’re talking about whenever we refer to CAGCBSPU throughout the remainder of this review.

Is the Create a Game Character: Blender, Substance Painter, Unity course for you?

To determine whether Darrin Lile’s Udemy course is a good fit for you or not, ask yourself the following questions down below.

The more you answer “yes” to each question, the more likely it is that you’ll like this course.

Can you understand what Darrin Lile’s course is about in 30 seconds or less?

Hopefully, you can easily grasp in 10 seconds or less what this online course is about simply by taking a look at the title that Darrin Lile chose for the course, “Create a Game Character: Blender, Substance Painter, Unity”, as well as its subtitle: “Learn to use Blender, Substance Painter, Krita, and Unity to create your own game characters.”.

This combo of title and subtitle should be enough to communicate the purpose of the training if Darrin Lile is a good, clear communicator (which, of course, you want in a teacher).

In our opinion, if you still don’t know what CAGCBSPU is about after looking at these two things, then this is a red flag, and you might be better off not taking this class.

Among other things, it means Darrin Lile hasn’t clearly and accurately conveyed what the course is about and might not be the best teacher for you.

For similar reasons, it’s important that you’re able to clearly understand what Create a Game Character: Blender, Substance Painter, Unity is all about from the first few lines of the course description.

So take just a few seconds to read the opening lines down below and see what you think of them. 

Opening lines of Darrin Lile’s official description of CAGCBSPU

In this course you will learn how to create a game character using Blender, Substance Painter, Krita, and Unity.

We will begin by creating a low-poly version of our character in Blender suitable for game engines. From this Blender model we will create a high-resolution version to be used for baking our texture maps. We will UV map the character in Blender, and then import the models into Substance Painter where we will create PBR textures for the character’s skin and costume. We will also cover how to best organize and prepare the character in Blender so that we can texture efficiently in Substance Painter. Once that is done, we will work on creating polygon hair in Blender and use Krita to hand-paint hair strands for the character.

We’ll then go back to Blender to rig our character, based on what Unity needs to set-up its Humanoid Rig system. If we can fulfill the requirements of the Humanoid Rig then it opens up the possibility for using hundreds of animations available for free and for purchase on the Unity Asset store. In the end, we will bring our character and textures into Unity and set it up so that we can use the animations that come free with Unity’s Standard Assets.

(Read more about this course on the official course page.)

Does CAGCBSPU pass the 30 Seconds Test?

You can read a lot more about Create a Game Character: Blender, Substance Painter, Unity on the official course page on Udemy, but the point is this: are the title, subtitle, and just the first few lines of the description enough to help you understand what the course is about?

If so, Darrin Lile has done a good job and can be considered more trustworthy and a good communicator, which are important qualities for any teacher.

And, if not, maybe you’re better off looking at other Design classes that are more clearly defined and more tailored to your specific interests.

Did Create a Game Character: Blender, Substance Painter, Unity appeal to you in 30 seconds or less?

Now that you’ve done the 30 Second Test with CAGCBSPU above, what is your gut reaction to this Design course with only the basic information of its title, subtitle, and the first few opening lines of its official course summary?

Did Darrin Lile do a good job conveying its subject matter, and did it immediately get your attention and appeal to you?

If so, Darrin Lile’s online course is certainly worth considering some more.

But if not, perhaps it’s in your best interest to consider some other Design courses instead, because clear communication and being able to hook and maintain your interest are two very important qualities for your online learning success.

Does Darrin Lile sound like a course instructor you’d like to learn from?

You’ve already learned how to use The 30 Second Test to make a quick evaluation of whether the CAGCBSPU course is worth taking.

We have a similar 15 Second Bio Test where you read only the first few lines of an instructor’s background — in this case, Darrin Lile’s background — and then you make a quick, snap judgment as to whether you think the instructor would be ideal for you.

There is no right or wrong answer. It’s just about going with your gut instinct. What might appeal to one potential student might alienate another, and vice versa.

(FYI, all Udemy instructors, including Darrin Lile, have a Udemy profile on their course page, so you can easily check for a bio and background on the Udemy website that way. We’re only including the first few lines of the bio down below for The 15 Second Bio Test).

Opening lines from Darrin Lile’s Udemy bio

Darrin Lile is an animator, developer, and Blender Foundation Certified Trainer teaching courses in computer animation and game development. He received Bachelor’s and Master’s degrees in Film and Media Studies from the University of Kansas and has worked as an animator, a producer of educational films, a sound editor for film and television, and as a computer security analyst.

(Learn more about this instructor on the official course page.)

What did you think about Darrin Lile after reading just the first few lines of the bio above?

After reading just the first few lines about Darrin Lile, did it make you more or less interested in taking the CAGCBSPU course?

And did it make you feel like Darrin Lile was more or less credible and qualified to teach Create a Game Character: Blender, Substance Painter, Unity?

Finally, overall, did you feel like you’d receive the proper training from the instructor of this Design course?

As always, we encourage you to listen to your gut instinct, which is different for every student.

Are the CAGCBSPU lessons clear, specific, and organized well?

Part of the (good) problem with Udemy’s online courses, such as the Create a Game Character: Blender, Substance Painter, Unity course, is that the instructors are constantly updating them, including adding and renaming lessons.

So it makes no sense whatsoever for us to list out all the modules and lessons in the CAGCBSPU course here, because you can just as easily go to the Udemy course page and get all the up to date course structure as of right now.

We do, however, have some tips about reviewing Darrin Lile’s course structure, so that you can get a better sense of whether this program is worth your time or not.

In a nutshell, you want to scan the the titles of the different sections and lessons of the course, and verify that they are clearly relevant to the course’s name, Create a Game Character: Blender, Substance Painter, Unity, as well as the course’s subtitle, Learn to use Blender, Substance Painter, Krita, and Unity to create your own game characters..

If the section names and lessons are clear, specific, and relevant, then it’s a good sign that CAGCBSPU is potentially a good, useful course for you, and you can have more confidence in Darrin Lile’s teaching abilities and lesson planning.

On the other hand, if the module names are confusing, vague, or irrelevant, then this is a red flag, which might indicate that the program is worth skipping.

Have you taken some free lessons from Darrin Lile that you enjoyed?

Have you already learned something from Darrin Lile that you valued or enjoyed?

For example, does the Create a Game Character: Blender, Substance Painter, Unity training have some free lessons that you can try? (Almost all Udemy instructors will give you at least one or two lessons for free to help you make a better, more informed decision before enrolling in their course.)

But if you weren’t able to get any CAGCBSPU lessons for free, have you perhaps watched a YouTube video by Darrin Lile, or perhaps come across this instructor’s thoughts on Quora, Facebook, LinkedIn, Github, Reddit, or some other platform?

Or have you perhaps even taken one of Darrin Lile’s free courses or free webinars? (Many online teachers offer these freebies, which is a great way to get to know them and evaluate their teaching methods before buying one of their courses.)

In any case, the more familiar you are with Darrin Lile’s teaching methods, and the more you enjoy them, the more likely it is that Create a Game Character: Blender, Substance Painter, Unity will be a good fit for you.

(P.S.: We strongly encourage you to seek out some free instruction from Darrin Lile before purchasing this course, since it’s one of the best ways to determine whether CAGCBSPU will be helpful for you.)

Are “Create a Game Character: Blender, Substance Painter, Unity” reviews generally positive?

On the bottom of the CAGCBSPU page, you can read student reviews of the class.

Prior to August 24, 2025, there were 980 students enrolled, 366 reviews / ratings, and it was overall rated 4.5 out of 5.

Obviously, the more highly other students rate CAGCBSPU the better, but no matter what, keep an open mind when reading the reviews, since you might still like a course a great deal that other students dislike.

After all, everyone’s got their own opinion.

We recommend that you spend only a couple minutes scanning the CAGCBSPU reviews to get an overall sense of them. You don’t have to read each one!

Is Darrin Lile responsive to student questions in the CAGCBSPU training?

You can see what other students have to say about this in their CAGCBSPU reviews.

But, our simple all time favorite way of gauging an instructor’s responsiveness is to simply email the instructor and see if or how they respond.

In this case, Udemy has a messaging system for students / anyone who has an account, and you can send Darrin Lile a message through this system quite easily, even if you haven’t bought CAGCBSPU yet.

For example, you could say, “Hi, and I came across CAGCBSPU while looking at Design courses on Udemy. If I enroll in your training, would you mind if I asked you any questions along the way?”

If you use this approach, the response (or lack of response) from the professor will tell you everything.

Obviously, the quicker the response the better!

Are you comfortable going through the lessons in Create a Game Character: Blender, Substance Painter, Unity on your own, online?

This is a big one, because Create a Game Character: Blender, Substance Painter, Unity is an online course as opposed to a course that you physically take in a classroom.

Of course, you will need a good internet connection to have access to the course material and lessons, but beyond that, you also have to be comfortable being self motivated to some degree, being on your own, and not having any physical interaction with any of the other students taking Create a Game Character: Blender, Substance Painter, Unity.

Yes, you will be able to interact with the students and the teacher, Darrin Lile, online, but it’s a different kind of experience than what you’d get if you were interacting with them in person.

This is not a big deal to most people, but it might be something for you to consider if you feel like you do better taking classes in person rather than learning online.

Do the pros / benefits of CAGCBSPU make it worth your time?

Ideally, if you’ve gone through the evaluation steps above, you have a list of positive things about the Create a Game Character: Blender, Substance Painter, Unity training that looks something like this:

  • The purpose of CAGCBSPU can be clearly grasped and understood, and its lesson structure is clear, specific, and well organized
  • Darrin Lile is well qualified to teach this subject matter, has good teaching abilities, and is responsive to student questions
  • Other CAGCBSPU students have great things to say about the program

Other benefits include:

  • You get to go through CAGCBSPU at your own pace
  • You join a community of 980 other students taking the course
  • You get lifetime access to the training
  • All updates to the training are free
  • You have a 30 day money back guarantee

Even if there are some things that you don’t like about the program, so what?

The question is simply this: do you think that CAGCBSPU would be worth your time, even if there are some things that could be better about it?

Can you comfortably afford CAGCBSPU?

Can you comfortably afford the cost of Create a Game Character: Blender, Substance Painter, Unity?

This is an important question to answer, because even if you think CAGCBSPU sounds like the greatest online class in the world, it’s still not worth taking if you can’t comfortably afford it!

Before August 24, 2025, the price was $12.99 before any Udemy discount, and you were able to pay with a credit card.

Keep in mind that this is a Udemy online course, and there’s a great chance that you can get a solid discount on CAGCBSPU with Udemy coupons / promo codes, especially with the strategies we provide for helping you find the best, most popular coupons available.

We’ll cover that in greater detail in the next section, because at the end of the day, its important that you can learn whatever you want to learn without getting into a lot of credit card debt.

How can you maximize your discount on Create a Game Character: Blender, Substance Painter, Unity?

By far, the easiest way to get the best and biggest discount on this course is to use the Create a Game Character: Blender, Substance Painter, Unity discount code link at the top of this page.

It will instantly give you the best coupon code we could find for Darrin Lile’s online training.

We don’t believe there’s a bigger discount than the one we provided, but if for some reason you’d like to try find one, you can use the methods below to hunt for the best CAGCBSPU course coupons and promo codes you can find.

FYI, the methods below will help you not just with getting CAGCBSPU for a better price, but also with any other Darrin Lile Udemy course that you’d like to get for cheaper.

How can Google help you get a CAGCBSPU discount?

To use this method, do a Google search for the CAGCBSPU training, but in your search query, be sure to add words like coupon code, promo code, deal, sale, discount, and Udemy.

For example, you might do a search for “Udemy Create a Game Character: Blender, Substance Painter, Unity promo code” or “Create a Game Character: Blender, Substance Painter, Unity udemy coupon codes” and see what turns up.

Similarly, you can use the same combination of search terms with Darrin Lile’s name and see what happens.

For example, you might do a Google search for “Darrin Lile Udemy coupons” or “Darrin Lile course coupon codes” and see if that helps you.

However, in general, it’s far more powerful to do a search for deals and coupon codes with the actual training’s name, than with the instructor’s name.

So in this case, for example, prioritize searches for “Create a Game Character: Blender, Substance Painter, Unity coupons” rather than “Darrin Lile coupons”.

How can a Udemy sale get you CAGCBSPU for cheaper?

Every once in while, Udemy will do a sitewide sale where they offer all (or almost all) their courses at a discounted price. For example, one of the best sales is where every course is only $10 or $9.99.

So, if you’re interested in saving as much money as possible, you could wait and see if you can get CAGCBSPU for this cheaper Udemy sale price one day.

The problem is that these sales only occur sporadically, so you might be waiting for a while. Also, if Darrin Lile decides not to participate in the site wide sale, then you won’t get a discount on CAGCBSPU, even though you could get a great discount on almost any other class at Udemy!

To understand this, think of there as being two different coupon categories for the CAGCBSPU course. Category one is an official Udemy coupon (which instructors can opt out of), while category two is a coupon offered directly by the instructor.

At the end of the day, it doesn’t matter what kind of a coupon tag you’re dealing with (for example, “officially from Udemy” or “officially from the instructor”), as long as long as as you’re dealing with active coupons that get you a better price.

How can you get a CAGCBSPU discount from Darrin Lile?

If you’re really serious about getting “Create a Game Character: Blender, Substance Painter, Unity” for the cheapest price possible, then perhaps one of the most powerful things you can do is get a coupon code straight from Darrin Lile, instead of waiting for a Udemy sale.

To do this, you can use either the direct approach or an indirect approach to try to get your discount.

With the direct approach, the big idea is to simply get Darrin Lile’s contact info in some way or another (whether it’s email, or Twitter, or whatever else).

Then you send a message saying something like “I’m interested in enrolling in Create a Game Character: Blender, Substance Painter, Unity. Do you happen to currently have an active coupon code for it that I could use?” (And then, hopefully, you’ll get a reply with your discount code.)

On the other hand, with the indirect approach, you join Darrin Lile’s mailing list, if you can find it, and then you hope that at some time CAGCBSPU will be promoted to you at a discount.

By far, the more powerful approach is the direct approach, because it tends to get results faster. But you can experiment with the indirect approach and see if it works for you.

Can you get CAGCBSPU for free?

Of course, the best possible price for the CAGCBSPU training is free! As in, you pay no money whatsoever.

And guess what? Sometimes Udemy instructors provide coupon codes that enable students to take their courses for free. So, perhaps it’s possible that Darrin Lile has done this.

Basically, if you’re trying to get this program for free, you will want to search for the course’s name along with other words like free coupon, or 100 off coupon.

For example, you might do a google search for “Create a Game Character: Blender, Substance Painter, Unity free coupon” or “Create a Game Character: Blender, Substance Painter, Unity 100 off coupon” and see what happens.

But keep this in mind: often, Udemy teachers will offer a free coupon for their course when it first opens to get some publicity and reviews. And then, after a few days, they’ll make the coupon expired.

So even Darrin Lile has offered free coupons for CAGCBSPU in the past, the odds are likely they will all be currently expired. This is a common pattern that we have found.

What about a CAGCBSPU free download?

It’s important to understand that there’s a difference between getting full access to the CAGCBSPU training for free legally with a free coupon code vs. finding a way to download CAGCBSPU illegally.

If you really want to go the download route, you can do a google search for something like “Create a Game Character: Blender, Substance Painter, Unity download”.

And if that doesn’t get you the results you want, you can add the word “free” to your search.

For example, perhaps you could do a google search for “Create a Game Character: Blender, Substance Painter, Unity free download”.

However, even if you get some results from these searches, we do not recommend that you take this course of action.

First of all, there are some shady sites out there that could be trying to infect your computer.

Second, Darrin Lile created this course and deserves monetary compensation for it.

And third, if you go the free download route, you’ll be missing out on a lot of value, because you won’t be able to ask the instructor questions or interact with the other 980 students enrolled in the program.

Can you get a refund on Create a Game Character: Blender, Substance Painter, Unity if you don’t like it?

Let’s say that you used our tips above, and you were able to buy the CAGCBSPU training at a fantastic discounted price. So at this point, you’re super excited.

Then, you actually dive into Darrin Lile’s course, and you discover that it just isn’t for you for whatever reason.

And now you’re super bummed, because you feel like it wasn’t money well spent.

Well, guess what?

Udemy offers a rock solid 30 day money back guarantee on all their courses, so you can get a refund on CAGCBSPU no matter what. And this means there is absolutely no risk.

Indeed, even if you left a super negative, critical review on the CAGCBSPU training, and then asked for your money back, you’d get a refund. For better or worse, there’s nothing Darrin Lile could do about it, since it is simply Udemy policy.

To sum it up: yes, you can get a full refund, so at the end of the day, don’t worry about the possibility of purchasing CAGCBSPU and not liking it, since you can always get your money back.

What is OCP’s overall rating of Create a Game Character: Blender, Substance Painter, Unity?

During this CAGCBSPU review, you’ve learned about some of the unusual ways we like to evaluate courses, such as with The 30 Second Test and The 15 Second Bio Test.

So our overall review process is perhaps a little unusual and different from other reviews out there. Keep this in mind when you consider the overall rating / score that we have given this course.

Anyway, after taking a look at the CAGCBSPU training, the instructor, Darrin Lile, and reading what other students have said about this program, we give it an overall rating of 4.6 out of 5.

Ultimately, though, what matters most is what you would rate it based on the same criteria.

What are some potential alternatives to Create a Game Character: Blender, Substance Painter, Unity?

If you like this course, you might also be interested in:


1. How To Learn Illustrator by Designing Awesome Logos

Logo design in Illustrator. Fundamentals of logo design in Illustrator Logo design form scratch Logo design basics

Taught by Adobe Certified Expert Designer and Online Entrepreneur


2. Fast animation and rigging techniques using Maya 2017

Learn to rig a biped character and animate a walk cycle for film, TV and video games for beginner Maya users

Taught by Experienced 3d artist and instructor


3. Introduction to ANSYS Workbench

You can start learning Ansys Workbench 19 from the begining with this training course !

Taught by Msc. Mechanical and Welding Engineer (Msc Mec. IWE & IWI-C)


4. NEW!| Complete Design Thinking Masterclass

The most complete Design Thinking course on the market. 7 easy steps to expert level Design Thinking professional!

Taught by Creative Director, CEO of 99grit


5. Graphic Design 2018 | Design 20+ Practical Projects

Learn Graphic Design By Doing 20+ Practical Projects, Including: Social Media Posts, Logos, Ads, Banners & More!

Taught by Join Over 80,000 Students | The Ultimate Online Courses!

TLDR: Just the quick facts about CAGCBSPU

Okay, if all of this was Too Long Didn’t Read for you, here is the Cliff’s Notes version of what CAGCBSPU’s online training is all about:

CAGCBSPU coupon & course info

Course Name: Create a Game Character: Blender, Substance Painter, Unity

Subtitle: Learn to use Blender, Substance Painter, Krita, and Unity to create your own game characters.

Instructor: Taught by Darrin Lile

Category: Design

Subcategory: 3D & Animation

Provided by: Udemy

Price: $12.99 (before discount)

Free coupon code: Get Udemy coupon code discount at top of page (no charge for coupon, especially since we are compensated for referrals via affiliate marketing)

CAGCBSPU review info & popularity

Prior to August 24, 2025…

Students: 980 students enrolled

Ratings: 366 reviews

Rank: ranked #343 in Udemy Design Courses in Udemy Design Courses

Rankings tip: rankings change all the time, so even if Create a Game Character: Blender, Substance Painter, Unity is a bestseller or one of the top Udemy courses one year, it doesn’t mean it will be a top Udemy course the next year

CAGCBSPU final details

Languages: English

Skill level: Intermediate

Lectures: 89 lectures lectures lessons

Duration: 12.5 total hours hours of video

What you get: Model and UV Map a 3D character in Blender suitable for game engines

Target audience: Intermediate 3D artists who are interested in learning the entire game character pipeline.

Requirements: Be able to navigate in Blender and have a basic understanding of the modeling tools.

Access: Lifetime access

Peace of mind: 30 day money back guarantee

Availability: available online, as well as on iOS and Android

Download options: check course to see if you can download lessons

95% off Super Crash Course in Blender (Coupon & Review)

Attention: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission at no extra cost to you. Thanks!

Super Crash Course in Blender - Udemy Coupon

Get Discount


This is the best Udemy Super Crash Course in Blender coupon code discount for 2025.

So if you’re interested in Marko Matosevic’s “Super Crash Course in Blender” course, which will help you increase your Design skills, get your discount on this Udemy online course up above while it’s still available. (The coupon code will be instantly applied.)

Super Crash Course in Blender review for 2025

In our review of this course, we try to help you answer all of your most important questions about Super Crash Course in Blender as quickly and efficiently as possible, so that you can determine whether this online education training is worth your time and money.

Feel free to jump to whatever question you want answered the most.

Here’s what you’ll learn:

Why use SCCIB as an abbreviation of the course name?

During our Super Crash Course in Blender course review, you might sometimes see us refer to it as SCCIB for the following 2 reasons:

  1. We created the acronym by taking the first letter of every word (which was very ingenious and innovative, we know)
  2. We’re lazy and SCCIB is simpler and easier for reviewing purposes

The full course name is 29 characters long, including blanks, while SCCIB is 5 characters long.

You do the math.

Okay, we’ll do the math. We’re saving 24 characters every time we use SCCIB.

So, just a heads up that we’ll be using this abbreviation sometimes, so you’re not left scratching your head and wondering what the heck we’re talking about whenever we refer to SCCIB throughout the remainder of this review.

Is the Super Crash Course in Blender course for you?

To determine whether Marko Matosevic’s Udemy course is a good fit for you or not, ask yourself the following questions down below.

The more you answer “yes” to each question, the more likely it is that you’ll like this course.

Can you understand what Marko Matosevic’s course is about in 30 seconds or less?

Hopefully, you can easily grasp in 10 seconds or less what this online course is about simply by taking a look at the title that Marko Matosevic chose for the course, “Super Crash Course in Blender”, as well as its subtitle: “Go through the utter most basic steps to get you started in Blender”.

This combo of title and subtitle should be enough to communicate the purpose of the training if Marko Matosevic is a good, clear communicator (which, of course, you want in a teacher).

In our opinion, if you still don’t know what SCCIB is about after looking at these two things, then this is a red flag, and you might be better off not taking this class.

Among other things, it means Marko Matosevic hasn’t clearly and accurately conveyed what the course is about and might not be the best teacher for you.

For similar reasons, it’s important that you’re able to clearly understand what Super Crash Course in Blender is all about from the first few lines of the course description.

So take just a few seconds to read the opening lines down below and see what you think of them. 

Opening lines of Marko Matosevic’s official description of SCCIB

In this course we go through the most basic of basic steps to get you going in Blender. This course will constantly grow with easy to follow steps, clearly labeled.

At the Present moment we cover simple modeling, as well as using the most common modifer, and using a little of animation pipeline.

See you in the course!

(Read more about this course on the official course page.)

Does SCCIB pass the 30 Seconds Test?

You can read a lot more about Super Crash Course in Blender on the official course page on Udemy, but the point is this: are the title, subtitle, and just the first few lines of the description enough to help you understand what the course is about?

If so, Marko Matosevic has done a good job and can be considered more trustworthy and a good communicator, which are important qualities for any teacher.

And, if not, maybe you’re better off looking at other Design classes that are more clearly defined and more tailored to your specific interests.

Did Super Crash Course in Blender appeal to you in 30 seconds or less?

Now that you’ve done the 30 Second Test with SCCIB above, what is your gut reaction to this Design course with only the basic information of its title, subtitle, and the first few opening lines of its official course summary?

Did Marko Matosevic do a good job conveying its subject matter, and did it immediately get your attention and appeal to you?

If so, Marko Matosevic’s online course is certainly worth considering some more.

But if not, perhaps it’s in your best interest to consider some other Design courses instead, because clear communication and being able to hook and maintain your interest are two very important qualities for your online learning success.

Does Marko Matosevic sound like a course instructor you’d like to learn from?

You’ve already learned how to use The 30 Second Test to make a quick evaluation of whether the SCCIB course is worth taking.

We have a similar 15 Second Bio Test where you read only the first few lines of an instructor’s background — in this case, Marko Matosevic’s background — and then you make a quick, snap judgment as to whether you think the instructor would be ideal for you.

There is no right or wrong answer. It’s just about going with your gut instinct. What might appeal to one potential student might alienate another, and vice versa.

(FYI, all Udemy instructors, including Marko Matosevic, have a Udemy profile on their course page, so you can easily check for a bio and background on the Udemy website that way. We’re only including the first few lines of the bio down below for The 15 Second Bio Test).

Opening lines from Marko Matosevic’s Udemy bio

I have currently been using Blender for three years with a focus on hard surface modelling and animation. Blender has appealed to me as my primary tool as there is such a strong community that follows it. There are always people to help, as well as people available to help.

(Learn more about this instructor on the official course page.)

What did you think about Marko Matosevic after reading just the first few lines of the bio above?

After reading just the first few lines about Marko Matosevic, did it make you more or less interested in taking the SCCIB course?

And did it make you feel like Marko Matosevic was more or less credible and qualified to teach Super Crash Course in Blender?

Finally, overall, did you feel like you’d receive the proper training from the instructor of this Design course?

As always, we encourage you to listen to your gut instinct, which is different for every student.

Are the SCCIB lessons clear, specific, and organized well?

Part of the (good) problem with Udemy’s online courses, such as the Super Crash Course in Blender course, is that the instructors are constantly updating them, including adding and renaming lessons.

So it makes no sense whatsoever for us to list out all the modules and lessons in the SCCIB course here, because you can just as easily go to the Udemy course page and get all the up to date course structure as of right now.

We do, however, have some tips about reviewing Marko Matosevic’s course structure, so that you can get a better sense of whether this program is worth your time or not.

In a nutshell, you want to scan the the titles of the different sections and lessons of the course, and verify that they are clearly relevant to the course’s name, Super Crash Course in Blender, as well as the course’s subtitle, Go through the utter most basic steps to get you started in Blender.

If the section names and lessons are clear, specific, and relevant, then it’s a good sign that SCCIB is potentially a good, useful course for you, and you can have more confidence in Marko Matosevic’s teaching abilities and lesson planning.

On the other hand, if the module names are confusing, vague, or irrelevant, then this is a red flag, which might indicate that the program is worth skipping.

Have you taken some free lessons from Marko Matosevic that you enjoyed?

Have you already learned something from Marko Matosevic that you valued or enjoyed?

For example, does the Super Crash Course in Blender training have some free lessons that you can try? (Almost all Udemy instructors will give you at least one or two lessons for free to help you make a better, more informed decision before enrolling in their course.)

But if you weren’t able to get any SCCIB lessons for free, have you perhaps watched a YouTube video by Marko Matosevic, or perhaps come across this instructor’s thoughts on Quora, Facebook, LinkedIn, Github, Reddit, or some other platform?

Or have you perhaps even taken one of Marko Matosevic’s free courses or free webinars? (Many online teachers offer these freebies, which is a great way to get to know them and evaluate their teaching methods before buying one of their courses.)

In any case, the more familiar you are with Marko Matosevic’s teaching methods, and the more you enjoy them, the more likely it is that Super Crash Course in Blender will be a good fit for you.

(P.S.: We strongly encourage you to seek out some free instruction from Marko Matosevic before purchasing this course, since it’s one of the best ways to determine whether SCCIB will be helpful for you.)

Are “Super Crash Course in Blender” reviews generally positive?

On the bottom of the SCCIB page, you can read student reviews of the class.

Prior to August 24, 2025, there were 452 students enrolled, 201 reviews / ratings, and it was overall rated 4.6 out of 5.

Obviously, the more highly other students rate SCCIB the better, but no matter what, keep an open mind when reading the reviews, since you might still like a course a great deal that other students dislike.

After all, everyone’s got their own opinion.

We recommend that you spend only a couple minutes scanning the SCCIB reviews to get an overall sense of them. You don’t have to read each one!

Is Marko Matosevic responsive to student questions in the SCCIB training?

You can see what other students have to say about this in their SCCIB reviews.

But, our simple all time favorite way of gauging an instructor’s responsiveness is to simply email the instructor and see if or how they respond.

In this case, Udemy has a messaging system for students / anyone who has an account, and you can send Marko Matosevic a message through this system quite easily, even if you haven’t bought SCCIB yet.

For example, you could say, “Hi, and I came across SCCIB while looking at Design courses on Udemy. If I enroll in your training, would you mind if I asked you any questions along the way?”

If you use this approach, the response (or lack of response) from the professor will tell you everything.

Obviously, the quicker the response the better!

Are you comfortable going through the lessons in Super Crash Course in Blender on your own, online?

This is a big one, because Super Crash Course in Blender is an online course as opposed to a course that you physically take in a classroom.

Of course, you will need a good internet connection to have access to the course material and lessons, but beyond that, you also have to be comfortable being self motivated to some degree, being on your own, and not having any physical interaction with any of the other students taking Super Crash Course in Blender.

Yes, you will be able to interact with the students and the teacher, Marko Matosevic, online, but it’s a different kind of experience than what you’d get if you were interacting with them in person.

This is not a big deal to most people, but it might be something for you to consider if you feel like you do better taking classes in person rather than learning online.

Do the pros / benefits of SCCIB make it worth your time?

Ideally, if you’ve gone through the evaluation steps above, you have a list of positive things about the Super Crash Course in Blender training that looks something like this:

  • The purpose of SCCIB can be clearly grasped and understood, and its lesson structure is clear, specific, and well organized
  • Marko Matosevic is well qualified to teach this subject matter, has good teaching abilities, and is responsive to student questions
  • Other SCCIB students have great things to say about the program

Other benefits include:

  • You get to go through SCCIB at your own pace
  • You join a community of 452 other students taking the course
  • You get lifetime access to the training
  • All updates to the training are free
  • You have a 30 day money back guarantee

Even if there are some things that you don’t like about the program, so what?

The question is simply this: do you think that SCCIB would be worth your time, even if there are some things that could be better about it?

Can you comfortably afford SCCIB?

Can you comfortably afford the cost of Super Crash Course in Blender?

This is an important question to answer, because even if you think SCCIB sounds like the greatest online class in the world, it’s still not worth taking if you can’t comfortably afford it!

Before August 24, 2025, the price was $12.99 before any Udemy discount, and you were able to pay with a credit card.

Keep in mind that this is a Udemy online course, and there’s a great chance that you can get a solid discount on SCCIB with Udemy coupons / promo codes, especially with the strategies we provide for helping you find the best, most popular coupons available.

We’ll cover that in greater detail in the next section, because at the end of the day, its important that you can learn whatever you want to learn without getting into a lot of credit card debt.

How can you maximize your discount on Super Crash Course in Blender?

By far, the easiest way to get the best and biggest discount on this course is to use the Super Crash Course in Blender discount code link at the top of this page.

It will instantly give you the best coupon code we could find for Marko Matosevic’s online training.

We don’t believe there’s a bigger discount than the one we provided, but if for some reason you’d like to try find one, you can use the methods below to hunt for the best SCCIB course coupons and promo codes you can find.

FYI, the methods below will help you not just with getting SCCIB for a better price, but also with any other Marko Matosevic Udemy course that you’d like to get for cheaper.

How can Google help you get a SCCIB discount?

To use this method, do a Google search for the SCCIB training, but in your search query, be sure to add words like coupon code, promo code, deal, sale, discount, and Udemy.

For example, you might do a search for “Udemy Super Crash Course in Blender promo code” or “Super Crash Course in Blender udemy coupon codes” and see what turns up.

Similarly, you can use the same combination of search terms with Marko Matosevic’s name and see what happens.

For example, you might do a Google search for “Marko Matosevic Udemy coupons” or “Marko Matosevic course coupon codes” and see if that helps you.

However, in general, it’s far more powerful to do a search for deals and coupon codes with the actual training’s name, than with the instructor’s name.

So in this case, for example, prioritize searches for “Super Crash Course in Blender coupons” rather than “Marko Matosevic coupons”.

How can a Udemy sale get you SCCIB for cheaper?

Every once in while, Udemy will do a sitewide sale where they offer all (or almost all) their courses at a discounted price. For example, one of the best sales is where every course is only $10 or $9.99.

So, if you’re interested in saving as much money as possible, you could wait and see if you can get SCCIB for this cheaper Udemy sale price one day.

The problem is that these sales only occur sporadically, so you might be waiting for a while. Also, if Marko Matosevic decides not to participate in the site wide sale, then you won’t get a discount on SCCIB, even though you could get a great discount on almost any other class at Udemy!

To understand this, think of there as being two different coupon categories for the SCCIB course. Category one is an official Udemy coupon (which instructors can opt out of), while category two is a coupon offered directly by the instructor.

At the end of the day, it doesn’t matter what kind of a coupon tag you’re dealing with (for example, “officially from Udemy” or “officially from the instructor”), as long as long as as you’re dealing with active coupons that get you a better price.

How can you get a SCCIB discount from Marko Matosevic?

If you’re really serious about getting “Super Crash Course in Blender” for the cheapest price possible, then perhaps one of the most powerful things you can do is get a coupon code straight from Marko Matosevic, instead of waiting for a Udemy sale.

To do this, you can use either the direct approach or an indirect approach to try to get your discount.

With the direct approach, the big idea is to simply get Marko Matosevic’s contact info in some way or another (whether it’s email, or Twitter, or whatever else).

Then you send a message saying something like “I’m interested in enrolling in Super Crash Course in Blender. Do you happen to currently have an active coupon code for it that I could use?” (And then, hopefully, you’ll get a reply with your discount code.)

On the other hand, with the indirect approach, you join Marko Matosevic’s mailing list, if you can find it, and then you hope that at some time SCCIB will be promoted to you at a discount.

By far, the more powerful approach is the direct approach, because it tends to get results faster. But you can experiment with the indirect approach and see if it works for you.

Can you get SCCIB for free?

Of course, the best possible price for the SCCIB training is free! As in, you pay no money whatsoever.

And guess what? Sometimes Udemy instructors provide coupon codes that enable students to take their courses for free. So, perhaps it’s possible that Marko Matosevic has done this.

Basically, if you’re trying to get this program for free, you will want to search for the course’s name along with other words like free coupon, or 100 off coupon.

For example, you might do a google search for “Super Crash Course in Blender free coupon” or “Super Crash Course in Blender 100 off coupon” and see what happens.

But keep this in mind: often, Udemy teachers will offer a free coupon for their course when it first opens to get some publicity and reviews. And then, after a few days, they’ll make the coupon expired.

So even Marko Matosevic has offered free coupons for SCCIB in the past, the odds are likely they will all be currently expired. This is a common pattern that we have found.

What about a SCCIB free download?

It’s important to understand that there’s a difference between getting full access to the SCCIB training for free legally with a free coupon code vs. finding a way to download SCCIB illegally.

If you really want to go the download route, you can do a google search for something like “Super Crash Course in Blender download”.

And if that doesn’t get you the results you want, you can add the word “free” to your search.

For example, perhaps you could do a google search for “Super Crash Course in Blender free download”.

However, even if you get some results from these searches, we do not recommend that you take this course of action.

First of all, there are some shady sites out there that could be trying to infect your computer.

Second, Marko Matosevic created this course and deserves monetary compensation for it.

And third, if you go the free download route, you’ll be missing out on a lot of value, because you won’t be able to ask the instructor questions or interact with the other 452 students enrolled in the program.

Can you get a refund on Super Crash Course in Blender if you don’t like it?

Let’s say that you used our tips above, and you were able to buy the SCCIB training at a fantastic discounted price. So at this point, you’re super excited.

Then, you actually dive into Marko Matosevic’s course, and you discover that it just isn’t for you for whatever reason.

And now you’re super bummed, because you feel like it wasn’t money well spent.

Well, guess what?

Udemy offers a rock solid 30 day money back guarantee on all their courses, so you can get a refund on SCCIB no matter what. And this means there is absolutely no risk.

Indeed, even if you left a super negative, critical review on the SCCIB training, and then asked for your money back, you’d get a refund. For better or worse, there’s nothing Marko Matosevic could do about it, since it is simply Udemy policy.

To sum it up: yes, you can get a full refund, so at the end of the day, don’t worry about the possibility of purchasing SCCIB and not liking it, since you can always get your money back.

What is OCP’s overall rating of Super Crash Course in Blender?

During this SCCIB review, you’ve learned about some of the unusual ways we like to evaluate courses, such as with The 30 Second Test and The 15 Second Bio Test.

So our overall review process is perhaps a little unusual and different from other reviews out there. Keep this in mind when you consider the overall rating / score that we have given this course.

Anyway, after taking a look at the SCCIB training, the instructor, Marko Matosevic, and reading what other students have said about this program, we give it an overall rating of 4.8 out of 5.

Ultimately, though, what matters most is what you would rate it based on the same criteria.

What are some potential alternatives to Super Crash Course in Blender?

If you like this course, you might also be interested in:


1. Design your Garden using Sketchup

An effective guide to create amazing 3D garden designs for yourself or for your clients.

Taught by Architect and Real Estate Analyst


2. How To Create an Amazing blog in 2019!

The Ultimate blogging course for beginners – How to Make and build a blog

Taught by Professional Webdesigner


3. Mastering Drivers in Blender 3D

Learn powerful tools to make your objects dynamic and automatic without having to write code

Taught by Computer Engineering Student


4. SketchUp to LayOut

The essential guide to creating construction documents with SketchUp Pro & LayOut

Taught by SketchUp Teacher


5. Learn Avid Media Composer

Learn the critical fundamentals of Avid Media Composer. Improve your skills with these simple techniques.

Taught by Certified Trainer – Owner GeniusDV

TLDR: Just the quick facts about SCCIB

Okay, if all of this was Too Long Didn’t Read for you, here is the Cliff’s Notes version of what SCCIB’s online training is all about:

SCCIB coupon & course info

Course Name: Super Crash Course in Blender

Subtitle: Go through the utter most basic steps to get you started in Blender

Instructor: Taught by Marko Matosevic

Category: Design

Subcategory: 3D & Animation

Provided by: Udemy

Price: $12.99 (before discount)

Free coupon code: Get Udemy coupon code discount at top of page (no charge for coupon, especially since we are compensated for referrals via affiliate marketing)

SCCIB review info & popularity

Prior to August 24, 2025…

Students: 452 students enrolled

Ratings: 201 reviews

Rank: ranked #444 in Udemy Design Courses in Udemy Design Courses

Rankings tip: rankings change all the time, so even if Super Crash Course in Blender is a bestseller or one of the top Udemy courses one year, it doesn’t mean it will be a top Udemy course the next year

SCCIB final details

Languages: English

Skill level: Beginner

Lectures: 13 lectures lectures lessons

Duration: 30 total mins hours of video

What you get: Start using Blender to create 3D objects, Animation and so on.

Target audience: Anyone who wants to start the journey of learning 3D

Requirements: Have the application Blender downloaded.

Access: Lifetime access

Peace of mind: 30 day money back guarantee

Availability: available online, as well as on iOS and Android

Download options: check course to see if you can download lessons